kwik_ls1

iTrader: (60)

I have up for sale a race prepped 1999 Camaro Z28. The car has about 62k on it. When I say race prepped, I should say it has all BMR and Spohn race suspension as well as QA1 10 way adjustables, K-member, a-arms, lca's, extreme torque arm, front sway bar, no rear, and panhard bar. It also has a brand new 10 point Wolfe cage that was just installed. I do have 1 Kirkey seat and bracket to go in the car. The car also has a flaming river manual rack and also a 12 Bolt narrowed Strange rear end to fit the 10" Magnum wheels. The car will need carpet, brakes, motor, trans and wiring to finish. The parts I have that come with the car are a brand new set of Weld Magnums with brand new drag radials and front runners, brand new set of 7 C2 Autometer gauges, Nasty Nate fuel system good up until 2000 hp. Just in the extra parts alone, I have about $6500 in parts plus the car. I do have extra miscellaneous parts that go with the car as well such as new flywheel, new driveshaft, coils, plug wires and so forth. The car is red and the paint is good on the car plus the car is from Arizona so it has no winters. The car has not been hacked in any way, only quality work done it. The car also has tinited windows and full power. A/C is out of the car along with stock heater box. I would say I would like to get $12k for the car with the parts or I would be willing to split depending on who wants what. If you email me, I will send you pics of the car and the parts. Just give me some time to respond. Also, my email is kwik_ls15592@yahoo.com or you can call me at 313-207-7062. The car has a clean title with no lien. I would take trades for possibly new lawn equipment plus cash, landscape trailers or possibly a plow truck but most likely would just like to get cash for the car and parts.

Thanks.

Tony

Derek98z

iTrader: (55)

So $12k for a car with only $6.5k in parts? Am I missing something or is this parts plus a $5.5k roller?

z28C4maro82z

iTrader: (33)

Trying to get money out of parts is a far stretch, and $5,500 for any roller is a stretch too. Good luck

kwik_ls1

iTrader: (60)

No, I have about $7-8k in suspension parts are rearend on the car and about $6500 in parts that are not on the car currently. So for $12k, you are getting the car basically for free. I am open to offers but I guess you would have to see all that you are getting, not to mention I just put $2k into the car to buy the cage and have it put in.

Derek98z

iTrader: (55)

That makes much more sense. Thanks for clarifying.
Please send pics to derek.smith@hilton.com
THanks

kwik_ls1

iTrader: (60)

OK I will send you some pics so you can kind of see what I have. I do need to take some pictures of the car in current state still but I will send you some from when it was assembled first and then send you the others. I will probably be sending the others sometime this weekend so keep a look out for them.

kwik_ls1

iTrader: (60)

Let me just put this out there as well, I would trade for a SS that is a street car such as stalled and cammed so that is an option also if somebody is looking to trade or else just sell outright.

kwik_ls1

iTrader: (60)

ttt........

kwik_ls1

iTrader: (60)

ttt.......a few pics added, email me for more pics.....

Bigspray01

iTrader: (1)

So y is the rear wheels on backward? Has the cage been certified, if so to what?

kwik_ls1

iTrader: (60)

Just to let you know, the rear wheels are on backwards because it has a narrowed Strange rear for a set of Weld Magnum's with 5" backspacing so a stock wheel will no fit on the car right. The cage has not been certed yet. The cage was just finished about a month ago and haven't touched the car since. I have to sell due to the wife being laid off. I am willing to wheel and deal to whoever is interested.

Thanks.

kwik_ls1

iTrader: (60)

ttt..............

kwik_ls1

iTrader: (60)

Ttt.........

kwik_ls1

iTrader: (60)

still for sale guys..........