1988 Mustang With Grand National Engine
#1
1988 Mustang With Grand National Engine
Hey guys, this is my baby, but I am looking to get something else as I am losing a little interest in this project. I have never owned an F-Body, and would love to get my hands on one.
Though I am interested in LS1's and LT1's, all trades will be considered. Bikes, SUV's, etc. Trades can be stock or modded, auto or manual.
Heres the Mustang
This car was built about a year ago. Everything is new-except the body. The body is in exelent condition-no rust, not twisted.
The motor is a professionally built 3.8 Buick Grand National power plant
-New Crank
-Billet Main Caps
-Steel Main Cap Girdle
-Crower Rods
-JE pistons
-86lb injectors
-CNC heads and Intake
-MSD DIS4
-FAST Engine Management
-T66 Turbo
-Custom made Spearco FMIC
-Trans Spec Powerglide w/ 4,400 stall
-Trans brake and line lock
-8.8 Rear End with Moser 31 Splines
-Tubular K member and lower control arms
-Full coil overs
This is a nasty street sleeper. The car dyno'd 518whp, and ran a 9.87@141mph on high boost! All gauges are hidden & mounted in the glove box, etc.
I will include a set of M/T ET STREET's mounted on 10-holes, as well as a set of MT ET DRAG's mounted on 10-holes.
I will include the laptop with the FAST program, it is all hooked up and tuned beautifully.
There is roughly $16,000 invested in this car, and though I wont get that much, I'm lookin for a nice trade. Around $9,500 or so is what would sell this quick, so thats what I'll shoot at.
Thanks for lookin! This car is gorgeous.
Have many many pictures of the car
LOCATED OUTSIDE OF CHICAGO
Though I am interested in LS1's and LT1's, all trades will be considered. Bikes, SUV's, etc. Trades can be stock or modded, auto or manual.
Heres the Mustang
This car was built about a year ago. Everything is new-except the body. The body is in exelent condition-no rust, not twisted.
The motor is a professionally built 3.8 Buick Grand National power plant
-New Crank
-Billet Main Caps
-Steel Main Cap Girdle
-Crower Rods
-JE pistons
-86lb injectors
-CNC heads and Intake
-MSD DIS4
-FAST Engine Management
-T66 Turbo
-Custom made Spearco FMIC
-Trans Spec Powerglide w/ 4,400 stall
-Trans brake and line lock
-8.8 Rear End with Moser 31 Splines
-Tubular K member and lower control arms
-Full coil overs
This is a nasty street sleeper. The car dyno'd 518whp, and ran a 9.87@141mph on high boost! All gauges are hidden & mounted in the glove box, etc.
I will include a set of M/T ET STREET's mounted on 10-holes, as well as a set of MT ET DRAG's mounted on 10-holes.
I will include the laptop with the FAST program, it is all hooked up and tuned beautifully.
There is roughly $16,000 invested in this car, and though I wont get that much, I'm lookin for a nice trade. Around $9,500 or so is what would sell this quick, so thats what I'll shoot at.
Thanks for lookin! This car is gorgeous.
Have many many pictures of the car
LOCATED OUTSIDE OF CHICAGO
#4
Originally Posted by turbochad
Did this car come from Penn. and do you have more pics you can email, thanks.
A great guy named Harold built this car out in Philly. Months ago, he was selling it, after him and I talked for a while I decided I'd take it off of his hands.
Its been very good to me! Just time for somethin new, it seems I go through cars like i change clothes.
#7
Originally Posted by BADMOFO
Where are you located? What does the car run as it sits?
As it sits, its good and has ran 10.15's in the 1/4.
Its seen high 9's on high boost, and this is all on the relatively small t66 turbo. These 3.8's dont wake up until you put a real turbo on them
Trending Topics
#12
Teching In
iTrader: (1)
Join Date: Jun 2005
Location: Chicago/Ohare airport area
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Has This Car Been Out Around Chicago Doing The Racing Thing? What Is Your Best Cash Price, This Weekend? I Just Sold My Camaro And I Have Some Cash To Play With. If You Can Pm Me Your Lowest Price. Thanks, Dave