BADBLUESS FOR SALE ADDED MORE PARTS too
06-24-2005 | 03:30 PM
#1
Thread Starter
TECH Enthusiast
Joined: Nov 2001
Posts: 613
Likes: 0
From: spring
BADBLUESS FOR SALE ADDED MORE PARTS too BADBLUESS FOR SALE $27,000
99 ss camaro,with 36,000 org.mile on the frame
UPDATED PRICE $24,000+ I WILL ADD THE PA K-MEMBER,A-ARMS,AND AEROSPACE BRAKES ON ALL FOUR CORNERS INSTALLED.
click here,or cut and paste to see pics
http://www.picturetrail.com/gallery/...2738&members=1
JASON- CONTACT NUMBERS
CELL# 832-768-3660
SHOP# 281-821-0010
LME BUILT 408ci. LONG BLOCK
-Wiesco nitrous pistons-
-Hell Fire rings-
-Lunati Pro Billet Connecting Rods-
-Clevite Rod Bearings-
-Federal Mogul Main Bearings-
-Lunati 4in. Crank-
-Comp R Lifters-
-Jessel SS Series Rockers-
-Stage 2 Heads Flowed 310cfm@..600 Lift-
-MTI Z1 Cam specs- 236/236-585/585-112 Lobe-
-Beck Sheet Metal Intake With Direct Port-
EXHAUST COMPONENTS
-Kooks Stainless Steel 1 7/8”x 2”x 3.5” collector-
-Stainless Magna flow Oval mufflers-
TRANSKING SPORTSMAN GLIDE
-Pro Trans Brake-
-1.76 Factory Gear Set-
-Turbo Spline Hy-Tuff Input-
-Red Clutches And Kolean Steel-
-Steel Clutch Hub-
-Kevlar Band-
-Dual Ring Billet Servo-
-Needle Bearings And Teflon Seals-
-Jig Trimmed Factory Case-
-Deep Alum. Pan-
-Rated To Hold 1200hp-
-Circle D Nitrous Converter 4000rpm’s on The Brake-
-Drive Shaft Built by North West Drive Train-
STRANGE 9in. REAREND
-Full Spool-
-Strange 3.55, 3.73, 4.56 gears-
-35 Spline Axles-
-5/8” Wheel studs-
SUSPENSION
-BADZ Fully Adjustable Control Arms, and Panhard rod-
-BMR Extreme Duty Torque Arm-
-Wolfe Anti-Roll Bar-
-Hotchkis Subframe Connectors
-Hals Adjustable Shocks On All Four Corners-
-Hotchkis Drag Springs In The Rear-
CHASSIS
-6in. Mike Moran Prostock Hood-
-Certified Custom Built 10pt. Roll Cage-
-Cage Professionally Painted,Then Clear Coated -
THE PRO’S THAT BUILT THIS CAR
HPE, AND CREW
OUTLAW RACE CARS
99 ss camaro,with 36,000 org.mile on the frame
UPDATED PRICE $24,000+ I WILL ADD THE PA K-MEMBER,A-ARMS,AND AEROSPACE BRAKES ON ALL FOUR CORNERS INSTALLED.
click here,or cut and paste to see pics
http://www.picturetrail.com/gallery/...2738&members=1
JASON- CONTACT NUMBERS
CELL# 832-768-3660
SHOP# 281-821-0010
LME BUILT 408ci. LONG BLOCK
-Wiesco nitrous pistons-
-Hell Fire rings-
-Lunati Pro Billet Connecting Rods-
-Clevite Rod Bearings-
-Federal Mogul Main Bearings-
-Lunati 4in. Crank-
-Comp R Lifters-
-Jessel SS Series Rockers-
-Stage 2 Heads Flowed 310cfm@..600 Lift-
-MTI Z1 Cam specs- 236/236-585/585-112 Lobe-
-Beck Sheet Metal Intake With Direct Port-
EXHAUST COMPONENTS
-Kooks Stainless Steel 1 7/8”x 2”x 3.5” collector-
-Stainless Magna flow Oval mufflers-
TRANSKING SPORTSMAN GLIDE
-Pro Trans Brake-
-1.76 Factory Gear Set-
-Turbo Spline Hy-Tuff Input-
-Red Clutches And Kolean Steel-
-Steel Clutch Hub-
-Kevlar Band-
-Dual Ring Billet Servo-
-Needle Bearings And Teflon Seals-
-Jig Trimmed Factory Case-
-Deep Alum. Pan-
-Rated To Hold 1200hp-
-Circle D Nitrous Converter 4000rpm’s on The Brake-
-Drive Shaft Built by North West Drive Train-
STRANGE 9in. REAREND
-Full Spool-
-Strange 3.55, 3.73, 4.56 gears-
-35 Spline Axles-
-5/8” Wheel studs-
SUSPENSION
-BADZ Fully Adjustable Control Arms, and Panhard rod-
-BMR Extreme Duty Torque Arm-
-Wolfe Anti-Roll Bar-
-Hotchkis Subframe Connectors
-Hals Adjustable Shocks On All Four Corners-
-Hotchkis Drag Springs In The Rear-
CHASSIS
-6in. Mike Moran Prostock Hood-
-Certified Custom Built 10pt. Roll Cage-
-Cage Professionally Painted,Then Clear Coated -
THE PRO’S THAT BUILT THIS CAR
HPE, AND CREW
OUTLAW RACE CARS
Last edited by badbluess; 06-24-2005 at 03:42 PM.
06-30-2005 | 02:49 PM
#7
Thread Starter
TECH Enthusiast
Joined: Nov 2001
Posts: 613
Likes: 0
From: spring
Originally Posted by BADZ
You guy's here on ls1tech must not like to go fast, this is the car to do just this!!!!! Instead of building duplicating a 40k car, "buy this one".....
TTT
TTT
No everybody must want something for nothing
