F/S/T '70 Dodge Dart
11-15-2005, 11:19 PM
#1
On The Tree
Thread Starter
iTrader: (3)
Join Date: Mar 2005
Location: Indy/Cincy
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
F/S/T '70 Dodge Dart As sad as it is, I've just lost interest in my love, and I'm looking to do something new.
'70 Dodge Dart, Original Swinger,(VIN LM23HXXXXX) Original 340/4 speed car (Has boxed rear framerails) Non-numbers matching
Engine:
'70/'71 Steel crank 340 short block + .030 Overbore
"X" casting heads, mild P&P work
Edelbrock LD340 Dual plane intake, Port matched to heads
Holley 3310 750 CFM Vac. Secondary carb
Mopar Perf. Electronic ignition upgrade with "Orange" Spark box & New distibutor
MSD Super Conductor Plug Wires, NGK Race V Power 4 plugs
Mopar Perf. .509 "Purple Shaft" cam & supplied MP lifters
Dynomax Coated Headers, 3" Exhaust w/ 40 series Flowmasters, dumped before the axles
Mopar Perf. Cast aluminum Valve covers & Air Cleaner
Car runs STRONG.
Driveline:
A833 4 speed trans
8 3/4 Rearend, 3.23 Posi, Fact. 31 spline axles *NEW: Axle bearings & seals*
Body:
Solid and straight AS CAN BE
3 Stage paint, Chrysler Dark Green Metallic done C/O Tony Gellenbeck, Newport carstar. I cannot stress this enough, THIS IS SHOW QUALITY PAINT!!!!! Very deep, very clear, and has TONS of shine.
Painted Bumblebee stripe, no stickers here.
Standard Dart trunk lid
Shaved front side marker lights looks very clean
All chrome+emblems are immaculate, car has always been garaged
U.S. Indy Slotted mags, 14x6 rear, 245/60/14 tires, 14x5ish on the front, 195/75/14 tires
Interior:
Deluxe Cloth interior (Not just a big vinyl bench), orig. back seat, front recovered in Chrysler New Old Stock (NOS) Additional rolls of NOS material can be had with the car
Bench seat (Very rare w/ 4 speed)
Rallye dash
AM Thumbwell radio
Carpet is ok, some stainage, I personally would replace it ($100 drop in preformed from ACC)
No floorboard rot PERIOD
Autometer Sport Comp 3 3/8" 8K RPM tach
Autometer Sport Comp 2 5/8" (big ones) Gauge pack with Elec. temp & Fuel level, Mech. Oil pressure
Chrome B&M T-Bar shift handle, with button for Jeg's Line Lock
Overall, I'd give it an 8.5/10
Other doo dads:
Subframe Connectors
Original spare tire
Jeg's Line Lock
Extras:
Set of '71 Date coded Rallye wheels (Powdercoated with stainless trim rings)
Orig. exhaust manifolds, Valve covers, Exhaust tips, air cleaner, & Intake
This was only a fair weather car, METICULOUS maintainence, Always had oil changed with QS Semi Synthetic High Horsepower blend.
Oh and heres some pics: (NOTE: back tires for the shot are different)
http://www.hometown.aol.com/speedkil...s/dartrear.jpg
http://www.hometown.aol.com/speedkil...rtinterior.jpg
http://www.hometown.aol.com/speedkil...dartengine.jpg
http://www.hometown.aol.com/speedkil...s/dartside.jpg
Price is 14,000 OBO I'm EXTREMELY open to trades right now, let me know what ya got!!!
'70 Dodge Dart, Original Swinger,(VIN LM23HXXXXX) Original 340/4 speed car (Has boxed rear framerails) Non-numbers matching
Engine:
'70/'71 Steel crank 340 short block + .030 Overbore
"X" casting heads, mild P&P work
Edelbrock LD340 Dual plane intake, Port matched to heads
Holley 3310 750 CFM Vac. Secondary carb
Mopar Perf. Electronic ignition upgrade with "Orange" Spark box & New distibutor
MSD Super Conductor Plug Wires, NGK Race V Power 4 plugs
Mopar Perf. .509 "Purple Shaft" cam & supplied MP lifters
Dynomax Coated Headers, 3" Exhaust w/ 40 series Flowmasters, dumped before the axles
Mopar Perf. Cast aluminum Valve covers & Air Cleaner
Car runs STRONG.
Driveline:
A833 4 speed trans
8 3/4 Rearend, 3.23 Posi, Fact. 31 spline axles *NEW: Axle bearings & seals*
Body:
Solid and straight AS CAN BE
3 Stage paint, Chrysler Dark Green Metallic done C/O Tony Gellenbeck, Newport carstar. I cannot stress this enough, THIS IS SHOW QUALITY PAINT!!!!! Very deep, very clear, and has TONS of shine.
Painted Bumblebee stripe, no stickers here.
Standard Dart trunk lid
Shaved front side marker lights looks very clean
All chrome+emblems are immaculate, car has always been garaged
U.S. Indy Slotted mags, 14x6 rear, 245/60/14 tires, 14x5ish on the front, 195/75/14 tires
Interior:
Deluxe Cloth interior (Not just a big vinyl bench), orig. back seat, front recovered in Chrysler New Old Stock (NOS) Additional rolls of NOS material can be had with the car
Bench seat (Very rare w/ 4 speed)
Rallye dash
AM Thumbwell radio
Carpet is ok, some stainage, I personally would replace it ($100 drop in preformed from ACC)
No floorboard rot PERIOD
Autometer Sport Comp 3 3/8" 8K RPM tach
Autometer Sport Comp 2 5/8" (big ones) Gauge pack with Elec. temp & Fuel level, Mech. Oil pressure
Chrome B&M T-Bar shift handle, with button for Jeg's Line Lock
Overall, I'd give it an 8.5/10
Other doo dads:
Subframe Connectors
Original spare tire
Jeg's Line Lock
Extras:
Set of '71 Date coded Rallye wheels (Powdercoated with stainless trim rings)
Orig. exhaust manifolds, Valve covers, Exhaust tips, air cleaner, & Intake
This was only a fair weather car, METICULOUS maintainence, Always had oil changed with QS Semi Synthetic High Horsepower blend.
Oh and heres some pics: (NOTE: back tires for the shot are different)
http://www.hometown.aol.com/speedkil...s/dartrear.jpg
http://www.hometown.aol.com/speedkil...rtinterior.jpg
http://www.hometown.aol.com/speedkil...dartengine.jpg
http://www.hometown.aol.com/speedkil...s/dartside.jpg
Price is 14,000 OBO I'm EXTREMELY open to trades right now, let me know what ya got!!!
11-16-2005, 01:44 PM
#4
On The Tree
Thread Starter
iTrader: (3)
Join Date: Mar 2005
Location: Indy/Cincy
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
I know, It's a stretch to try to sell it on a GM specific website, but If I could find the right person with an F-Body to trade for it, I figured it was worth a shot.
Bump it up.
Bump it up.
11-17-2005, 06:18 PM
#6
Teching In
Join Date: Nov 2005
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
2000 Black Pontiac Trans Am
Ls1 5.7L
Ram Air Intake
6 speed
T-Tops
38K Miles
Black leather
5.0 Short shifter
comp cams hardned push rods
x4 slotted and cross-drilled rotors
magnaflow cat back
Think about it? Where is the Dart located?
Ls1 5.7L
Ram Air Intake
6 speed
T-Tops
38K Miles
Black leather
5.0 Short shifter
comp cams hardned push rods
x4 slotted and cross-drilled rotors
magnaflow cat back
Think about it? Where is the Dart located?
Trending Topics
11-17-2005, 08:37 PM
#8
11-18-2005, 12:16 AM
#10
Originally Posted by snipes2323
2000 Black Pontiac Trans Am
Ls1 5.7L
Ram Air Intake
6 speed
T-Tops
38K Miles
Black leather
5.0 Short shifter
comp cams hardned push rods
x4 slotted and cross-drilled rotors
magnaflow cat back
Think about it? Where is the Dart located?
Ls1 5.7L
Ram Air Intake
6 speed
T-Tops
38K Miles
Black leather
5.0 Short shifter
comp cams hardned push rods
x4 slotted and cross-drilled rotors
magnaflow cat back
Think about it? Where is the Dart located?
11-19-2005, 03:09 PM
#11
On The Tree
Thread Starter
iTrader: (3)
Join Date: Mar 2005
Location: Indy/Cincy
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Snipes, I'm EXTREMELY interested in the T/A. Can I get some pictures to onebad340mopar@aol.com
I'm located in Cincinnati Ohio
I'm located in Cincinnati Ohio
11-20-2005, 08:27 PM
#13
On The Tree
Thread Starter
iTrader: (3)
Join Date: Mar 2005
Location: Indy/Cincy
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Got the pics, if you were a little closer I'd consider it. I just don't have the time it would take to make something like that happen.
Still up for grabs.
Still up for grabs.
11-30-2005, 02:16 AM
#19
On The Tree
Thread Starter
iTrader: (3)
Join Date: Mar 2005
Location: Indy/Cincy
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
The one outing I made to the track (made 2 passes) with the car resulted in a 14.125 @ 101MPH with a 2.36 60'. I have a race car, so I didn't make a habit of taking it to the track, or I would have at least tried to solve the traction issues. My guess, with some stickies, it would probably be a mid-low 13 second car with the 3.23's.
As far as power, I really have no idea.
As far as power, I really have no idea.