95 Turbo Cobra for sale or trade for 03+ sport bike
#1
Teching In
Thread Starter
Join Date: Apr 2002
Location: TN
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
95 Turbo Cobra for sale or trade for 03+ sport bike
Someone better ****** this up before I come to my senses and realize what I'm doing.
1995 SVT Cobra, black on black, 165k miles (should be a lot less, previous owner had 3.73's with no speedo correction), clean title/carfax, runs great, motor doesn't smoke. Paint is ok, there are chips and scratches that you'd see on any 11 year old car. Interior is in good shape except for a small tear on the drivers seat, a new(er) complete rear seat was just put in. I bought it last July and have put about 3k miles on it or so. It was near stock when I bought it, just gears and exhaust.
Mods I have installed in the last year BRAND NEW (except turbo kit/motor)
-Stock longblock
-ARP head studs
-PT9333 head gaskets (known for taking boost VERY well with head studs)
- DIY turbo kit with Precision frount mount intercooler, Masterpower 60-1 turbo, 3.5" downpipe, Tial 38mm wastegate, Tial 50mm BOV, etc.
- Innovate WIDEBAND 02 sensor and gauge
- Autometer C2 Electric Fuel Pressure gauge
- Autometer C2 Boost gauge
- Tremec TKO600 with .64 overdrive
- Mcleoud SFI blowproof bellhousing
- Spec Stage 3 clutch
- FRP aluminum driveshaft
- Eaton posi
- Superior 31 spline axles
- 3.27 gears
- Welded subframe connectors
- Wedled torque boxes
- Max motorsports clutch cable, quadrant, adjuster
- Pro3i weight jacker adjustable lower control arms
- Pro3i upper control arms
- Megasquirt FULL STANDALONE EFI fuel management and spark control
- Kirban adjustable fuel pressure regulator
- Walbro 255glph High Pressure fuel pump
- 42lb Fuel injectors
- MSD6A ignition box
- MSD Blaster TFI coil
- SMOKED headlight/corners
- OEM Cobra floor mats
- 03/04 Cobra wheels with new tires
I'm probably still missing some things but that is the majority of it. I'm getting the itch to ride again and am looking to buy or trade towards a 03+ sport bike. Might consider other trades if I can turn around and sell the vehicle easily.
One other thing, the turbo kit is not completely on it yet. I have the whole hotside on it right now and should finish up the cold side this weekend and fire it up.
To build this car would cost an arm and a leg and all the work is done for you. On 8psi 93 octane it should make around 340rwhp/420rwtq, 12psi on 93 oct should net you 430+rwhp/500+tq, and then on 15psi with alky injection or race gas and you're looking at towards 500rwhp easy.
Just getting a Cobra and putting a turbo kit would cost you this much. Let alone a BULLETPROOF drivetrain that you can throw slicks on and beat the **** out of without breaking anything. I didn't build it backwards with a badass motor and have to baby it in fear of breaking trannies/clutches/rears.
I'm asking $11,600 OBO finished. I'm located in Maryville, TN, which is near Knoxville.
Any questions/offers PM me, post in the thread, or better yet e-mail me at cuda6pak440@cs.com
1995 SVT Cobra, black on black, 165k miles (should be a lot less, previous owner had 3.73's with no speedo correction), clean title/carfax, runs great, motor doesn't smoke. Paint is ok, there are chips and scratches that you'd see on any 11 year old car. Interior is in good shape except for a small tear on the drivers seat, a new(er) complete rear seat was just put in. I bought it last July and have put about 3k miles on it or so. It was near stock when I bought it, just gears and exhaust.
Mods I have installed in the last year BRAND NEW (except turbo kit/motor)
-Stock longblock
-ARP head studs
-PT9333 head gaskets (known for taking boost VERY well with head studs)
- DIY turbo kit with Precision frount mount intercooler, Masterpower 60-1 turbo, 3.5" downpipe, Tial 38mm wastegate, Tial 50mm BOV, etc.
- Innovate WIDEBAND 02 sensor and gauge
- Autometer C2 Electric Fuel Pressure gauge
- Autometer C2 Boost gauge
- Tremec TKO600 with .64 overdrive
- Mcleoud SFI blowproof bellhousing
- Spec Stage 3 clutch
- FRP aluminum driveshaft
- Eaton posi
- Superior 31 spline axles
- 3.27 gears
- Welded subframe connectors
- Wedled torque boxes
- Max motorsports clutch cable, quadrant, adjuster
- Pro3i weight jacker adjustable lower control arms
- Pro3i upper control arms
- Megasquirt FULL STANDALONE EFI fuel management and spark control
- Kirban adjustable fuel pressure regulator
- Walbro 255glph High Pressure fuel pump
- 42lb Fuel injectors
- MSD6A ignition box
- MSD Blaster TFI coil
- SMOKED headlight/corners
- OEM Cobra floor mats
- 03/04 Cobra wheels with new tires
I'm probably still missing some things but that is the majority of it. I'm getting the itch to ride again and am looking to buy or trade towards a 03+ sport bike. Might consider other trades if I can turn around and sell the vehicle easily.
One other thing, the turbo kit is not completely on it yet. I have the whole hotside on it right now and should finish up the cold side this weekend and fire it up.
To build this car would cost an arm and a leg and all the work is done for you. On 8psi 93 octane it should make around 340rwhp/420rwtq, 12psi on 93 oct should net you 430+rwhp/500+tq, and then on 15psi with alky injection or race gas and you're looking at towards 500rwhp easy.
Just getting a Cobra and putting a turbo kit would cost you this much. Let alone a BULLETPROOF drivetrain that you can throw slicks on and beat the **** out of without breaking anything. I didn't build it backwards with a badass motor and have to baby it in fear of breaking trannies/clutches/rears.
I'm asking $11,600 OBO finished. I'm located in Maryville, TN, which is near Knoxville.
Any questions/offers PM me, post in the thread, or better yet e-mail me at cuda6pak440@cs.com
#3
Teching In
Thread Starter
Join Date: Apr 2002
Location: TN
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SublimeRT
Zach! What is this.....everyone ditching their Cobras, eh? I see this was posted in April though...
Haha, yeah man, I'm getting the itch for a bike again, stupid spring time!
#5
Teching In
Thread Starter
Join Date: Apr 2002
Location: TN
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by darkside98
where's the turbo in the pics?