2000 Camaro SS M6
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Sep 2003
Location: Southern Maryland
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
2000 Camaro SS M6
I have a 2000 Silver SS that I am looking to go ahead and sell. Car is very clean with just under 53k miles. I am the 2nd owner of this vehicle, car was bought new back in 2000 by a good buddy of mine. I've owned it since July of 05'.
Mods are:
6 spd with Mcleod SD organic/kevlar clutch with adj master.
B&M Ripper shifter
Strange 12 bolt with HD posi and 4.11 gears, TA cover
BMR- adj PHR, STB, LCA's, tubular K-member.
Texas speed clear lid.
Jantzer ported TB (chrome)
LS6 intake
Whisper ported maf ends
Smooth Bellows
Hooker coated LT's
custom 3" aluminum Y w/cutout
Flowmaster muff with 3" SLP tips
FMS F11 cam on a 114 lsa
Rollmaster Double roller, heat treated timing chain
Ported LS6 oil pump from Texas speed
Stock replacement Comp Cams Lifters
March fluid dampened UD crank pulley.
NGK TR55 plugs, relocated coil packs (under cowl) with Moroso Ultra wires.
AMW Catch can
Red Harlan shift light
SLP fan control switch
Hurst roll control line lock.
Bilstein Shocks with BMR lowering springs(up front, stock height in the rear)
Shaved Painted valve covers
Power Antenna
SS floor mats and Deck mat.
Zaino on the car and the Leather.
Looking to get 16,000
Thanks for looking
Chris
Mods are:
6 spd with Mcleod SD organic/kevlar clutch with adj master.
B&M Ripper shifter
Strange 12 bolt with HD posi and 4.11 gears, TA cover
BMR- adj PHR, STB, LCA's, tubular K-member.
Texas speed clear lid.
Jantzer ported TB (chrome)
LS6 intake
Whisper ported maf ends
Smooth Bellows
Hooker coated LT's
custom 3" aluminum Y w/cutout
Flowmaster muff with 3" SLP tips
FMS F11 cam on a 114 lsa
Rollmaster Double roller, heat treated timing chain
Ported LS6 oil pump from Texas speed
Stock replacement Comp Cams Lifters
March fluid dampened UD crank pulley.
NGK TR55 plugs, relocated coil packs (under cowl) with Moroso Ultra wires.
AMW Catch can
Red Harlan shift light
SLP fan control switch
Hurst roll control line lock.
Bilstein Shocks with BMR lowering springs(up front, stock height in the rear)
Shaved Painted valve covers
Power Antenna
SS floor mats and Deck mat.
Zaino on the car and the Leather.
Looking to get 16,000
Thanks for looking
Chris
Last edited by CCut; 11-16-2006 at 03:26 PM.
#2