2001 Baldwin Motion tribute GMMG Camaro 5 pg mag spread
#1
Teching In
Thread Starter
iTrader: (8)
Join Date: Dec 2004
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This is a 2001 Baldwin-Motion Tribute Camaro featured in Camaro Performance May issue EMAIL FOR PICTURES OF THE CAR
The Camaro is a one of a kind tribute that pays homage to the Baldwin style muscle car of the past created by BRP hotrods. The car has a custom one off paint job that is artic white with a 1970 Camaro style (Citrus Green) Baldwin motion stripe. This Camaro features some very rare GMMG prototype parts and is a featured car in this months May . issue of Camaro Performers (5 page spread on the car). The hood front spoiler and speedo cluster all are from a Prototype car that GMMG (who built the ZL-1’s, Dale Earnhart, the Fred Gibb and Dicky Harrell cars) who was planning to build as set of 4th gen Motion cars with the help of Joel Rosen himself. (aka Mr. Motion) the speedo cluster has also been signed by Mr. Motion. After the deal with GMMG and Joel Rosen fell through the parts were acquired by BRPhotrods and a one of a kind muscle car was created. BRP has had several cars grace the cover of hotrod magazine including the Year one 1969 LS1 Camaro. Listed below are the modifications that bring this Camaro to super car status.
Engine
Comp cams (Push rods, timing chain)
Fast composite intake
Crane cams (600-lift LS cam and valve spring package)
BRP intake system
Curtisbilt shaft roller rockers
Custom tune for engine to take full advantage of all additions
Zex direct port injection nitrous system(100 shot most ever used)
Suspension
BRP five-point roll cage
BRP weld in sub frame connectors
BRP boxed lower control arms with polyurethane busing
Eibach Pro springs
LP Firehawk 17 wheels with Yokohama ES 100 275/40 ZR17
Stainless steel brake set 13 rotors 3 piston brakes with rear set powder coated white
Two rear ends one with 2:73 gears and one with 3:42 both complete with brakes.
Exhaust
Stainless works big long tube headers
2 ½ cambered pipes
real dual exhaust though one of a kind functional side pipes
Interior
Custom hounds tooth seats
5-point harness
Trans
TCI street fighter 3500 converter
during the Long Haul event this car has runs mid to high 11sec quarter miles with 1.5 sec 60 foot times and placed second at the Fastest ET event. Also it ran 166.9 mph clocked at the top speed challenge and one of the fasted laps at road Atlanta during the event.
This is a very rare and serious car this is not only a custom-built show car it’s a thoroughbred racer with a direct link to the Baldwin Motions that sell for hundreds of thousands of dollars. The GMMG cars such as the Dicky Harrells a ZL-1 4th gen Camaros are already over the 100,00 mark this car is sure to appreciate in value and look good doing it.
The car is listed at 29,999 and any serious buyers can contact me at Blackbirdpr1@yahoo.com for more info and pictures.
www.Brphotrods.com (BRPs web site) picture on front of the web site
www.GMMGinc.net
The Camaro is a one of a kind tribute that pays homage to the Baldwin style muscle car of the past created by BRP hotrods. The car has a custom one off paint job that is artic white with a 1970 Camaro style (Citrus Green) Baldwin motion stripe. This Camaro features some very rare GMMG prototype parts and is a featured car in this months May . issue of Camaro Performers (5 page spread on the car). The hood front spoiler and speedo cluster all are from a Prototype car that GMMG (who built the ZL-1’s, Dale Earnhart, the Fred Gibb and Dicky Harrell cars) who was planning to build as set of 4th gen Motion cars with the help of Joel Rosen himself. (aka Mr. Motion) the speedo cluster has also been signed by Mr. Motion. After the deal with GMMG and Joel Rosen fell through the parts were acquired by BRPhotrods and a one of a kind muscle car was created. BRP has had several cars grace the cover of hotrod magazine including the Year one 1969 LS1 Camaro. Listed below are the modifications that bring this Camaro to super car status.
Engine
Comp cams (Push rods, timing chain)
Fast composite intake
Crane cams (600-lift LS cam and valve spring package)
BRP intake system
Curtisbilt shaft roller rockers
Custom tune for engine to take full advantage of all additions
Zex direct port injection nitrous system(100 shot most ever used)
Suspension
BRP five-point roll cage
BRP weld in sub frame connectors
BRP boxed lower control arms with polyurethane busing
Eibach Pro springs
LP Firehawk 17 wheels with Yokohama ES 100 275/40 ZR17
Stainless steel brake set 13 rotors 3 piston brakes with rear set powder coated white
Two rear ends one with 2:73 gears and one with 3:42 both complete with brakes.
Exhaust
Stainless works big long tube headers
2 ½ cambered pipes
real dual exhaust though one of a kind functional side pipes
Interior
Custom hounds tooth seats
5-point harness
Trans
TCI street fighter 3500 converter
during the Long Haul event this car has runs mid to high 11sec quarter miles with 1.5 sec 60 foot times and placed second at the Fastest ET event. Also it ran 166.9 mph clocked at the top speed challenge and one of the fasted laps at road Atlanta during the event.
This is a very rare and serious car this is not only a custom-built show car it’s a thoroughbred racer with a direct link to the Baldwin Motions that sell for hundreds of thousands of dollars. The GMMG cars such as the Dicky Harrells a ZL-1 4th gen Camaros are already over the 100,00 mark this car is sure to appreciate in value and look good doing it.
The car is listed at 29,999 and any serious buyers can contact me at Blackbirdpr1@yahoo.com for more info and pictures.
www.Brphotrods.com (BRPs web site) picture on front of the web site
www.GMMGinc.net
#3
Teching In
Thread Starter
iTrader: (8)
Join Date: Dec 2004
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Car is still available and we are willing to take a reasonable offer for the car
You can contact Phil Brewer of BRP hotrods at 1-770-751-0687 or email me at Blackbirdpr1@yahoo.com for pics of the Camaro. This is a great chance to get a one of none GMMG car.
You can contact Phil Brewer of BRP hotrods at 1-770-751-0687 or email me at Blackbirdpr1@yahoo.com for pics of the Camaro. This is a great chance to get a one of none GMMG car.
#4
#6
Teching In
Thread Starter
iTrader: (8)
Join Date: Dec 2004
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
the files are all larger then the 100 kb limit on the forum i chopped a image in three spots to just get a idea of what the car looks like i have over 100 pics of the car from the entire build and the magazine articles scanned so if your serious about the car i will send a lot of pics so you can truly see what the car looks like i also have the image of the gauge cluster that is signed by MR. Motion. This is the one car GMMG didn’t get to build this is truly a one of a kind Camaro that should not exist.
Trending Topics
#8
Teching In
Thread Starter
iTrader: (8)
Join Date: Dec 2004
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
like i said the smallest pics i have are 300 kb the sites limit is 100 kb i had to chop the pic i posted in 3 seperate sections i have tons of the interior which is a one off hounds tooth with a very nice BRP roll cage in it so if your serious about the car ill send anyone shots of the entire car and mag article
#9
TECH Resident
iTrader: (2)
Join Date: Oct 2006
Location: palmharbor/Clearwater,FL
Posts: 979
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
not realy intrested in the car but could you send me the article ide like to know more?
Matthewaraymond7888@yahoo.com
Matthewaraymond7888@yahoo.com
#10