feeler, 98 stripper shell/roller, cut the hell up for racing
#1
feeler, 98 stripper shell/roller, cut the hell up for racing
i have the shell left. its a 98Z28 with 68K on the chassie. black. clear title in hand.
sanded, primed, resanded, rattled canned the engine bay black, looks decent
parts included
welded subframes
front bumper
doors (on the car)
rear hatch w/ glass (on the car)
stock k member
stock front suspention minus shocks
gutted dash
trimmed down interior wire harness
a pillars
trunk seperator
steering column w/ grant elite gt steering wheel
m6 pedals
door panels (manual windows)
rear bumper
master cylinder
stock calipers grinded to fit 15s
good rotors
stock torque arm
new stock rear shocks
stock springs
stock motor mounts
stock rack and pinion
cut metal
metal were battery was
cowl metal around wipers
lower radiator support
inner fender support
metal above fuel tank for easy fuel pump swap
all metal that holds on hood (will need a pin on)
front bumper support mounts
all tabs holding on back seats
parts i need to make it a roller
rearend
phb
lca
3 spare tires
id have to put all the parts on, right now its a shell. i would need a rear, phb, lca and wheels from buyer to make a roller.
i also have all the stuff to put the front bumper into place. if you get fenders , hood, berger panel, head and tail lights itll be complete on the outside
does not have headlight harness
no fuel tank
no rear hatch weather stripping
can include headliner, kirkey mounted to stock adjustable rail, chromolly k member for the right price
asking 1,700
sanded, primed, resanded, rattled canned the engine bay black, looks decent
parts included
welded subframes
front bumper
doors (on the car)
rear hatch w/ glass (on the car)
stock k member
stock front suspention minus shocks
gutted dash
trimmed down interior wire harness
a pillars
trunk seperator
steering column w/ grant elite gt steering wheel
m6 pedals
door panels (manual windows)
rear bumper
master cylinder
stock calipers grinded to fit 15s
good rotors
stock torque arm
new stock rear shocks
stock springs
stock motor mounts
stock rack and pinion
cut metal
metal were battery was
cowl metal around wipers
lower radiator support
inner fender support
metal above fuel tank for easy fuel pump swap
all metal that holds on hood (will need a pin on)
front bumper support mounts
all tabs holding on back seats
parts i need to make it a roller
rearend
phb
lca
3 spare tires
id have to put all the parts on, right now its a shell. i would need a rear, phb, lca and wheels from buyer to make a roller.
i also have all the stuff to put the front bumper into place. if you get fenders , hood, berger panel, head and tail lights itll be complete on the outside
does not have headlight harness
no fuel tank
no rear hatch weather stripping
can include headliner, kirkey mounted to stock adjustable rail, chromolly k member for the right price
asking 1,700
Last edited by deadlyz28; 06-15-2008 at 05:08 PM.
#6
Roller for sale
You have no fenders?
You need LCA's for the front or the rear?
How much of the wiring harness was removed?
If I bring the parts are you going to install so that I can get it on a trailer?
Does it have any seats? It is a hardtop right?
Thanks
Bruce
You need LCA's for the front or the rear?
How much of the wiring harness was removed?
If I bring the parts are you going to install so that I can get it on a trailer?
Does it have any seats? It is a hardtop right?
Thanks
Bruce
Trending Topics
#12
#13