2001 SOM WS6 cheap $7000 low miles.
10-01-2008, 07:30 AM
#21
Teching In
Thread Starter
Join Date: Aug 2008
Location: ashland ky
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Ok after searching ebay i found 2 different seat styles. YES 2. i will include the auction for one of them so you people can see for yourself that i am NOT A LIAR!!!!
http://cgi.ebay.com/ebaymotors/Cars-...=p4506.c0.m245
I think the seats have that style because they do not have LUMBAR. Pretty sure that is it. And quite a few 2000 cars had those same seats so it might have been a carry over thing. And for the record again after i looked at pics of my 02 ceta it had lumbar so it did not have these seats.
Also please remember i do own a boby shop. I am doing a high dollar restoration for a vender on here that is going to receive a huge LSX powerplant so i do good work and can display some of it. So if someone wants this car fixed and painted i can do that pretty reasonable, around $1500. So for $7500 you get a very beautiful SOM WS6.
http://cgi.ebay.com/ebaymotors/Cars-...=p4506.c0.m245
I think the seats have that style because they do not have LUMBAR. Pretty sure that is it. And quite a few 2000 cars had those same seats so it might have been a carry over thing. And for the record again after i looked at pics of my 02 ceta it had lumbar so it did not have these seats.
Also please remember i do own a boby shop. I am doing a high dollar restoration for a vender on here that is going to receive a huge LSX powerplant so i do good work and can display some of it. So if someone wants this car fixed and painted i can do that pretty reasonable, around $1500. So for $7500 you get a very beautiful SOM WS6.
Last edited by 1badlsx69; 10-01-2008 at 07:58 AM.
10-01-2008, 08:05 AM
#22
Teching In
iTrader: (1)
Join Date: Jun 2003
Location: Weatherford, TX DFW
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Yes for that Busa. I will try to get some more pics today. Camera has been ggetting ugly with me.
I would like the front facia fixed an dpainted an dthe driver side if possible. Not sure how hard that would be to blend from the pics. I would just want it to look nice from the outside for daily driving.
Last edited by Phoenix383; 10-01-2008 at 08:13 AM.
10-01-2008, 08:58 AM
#23
Teching In
Thread Starter
Join Date: Aug 2008
Location: ashland ky
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Let me try to sell as is for a little while. That color is quite hard to blend but something poeple do not know and will argue to the death is the front and rear bumper cover are a slight different shade from the factory. Reason being is the front and rear covers are painted off the car and if you dont spray a metallic color exact placement as the rest od the car oyu will end up slightly different. Go to a dealership and look. You will see the difference. I have a local offer for $7500 but paint booth is filled for about a couple weeks.
10-01-2008, 03:11 PM
#26
I wasn't saying you are scamming anyone, I was just making a point.. Those seats are the leather seats that came in the V6 and formula. Trans AM's 2000 and early had to upgrade to the pneumatic seats, but in 2001 they became standard. It maybe just an early 01. Or someone may have switched them either way you are being honest with the car and that wasn't my point at all..
You are incorrect. The AQ9 lumbar seats became standard in all trans ams in 2002. Up til that year they were a very commonly installed option, but still an option. So, his seats are probably the original ones. I have seen tons of those seats in 98 - 2001 trans ams.
10-01-2008, 03:51 PM
#27
TECH Enthusiast
Join Date: Nov 2005
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
My mistake then.... I was told it was 2001.....
10-01-2008, 08:58 PM
#28
Teching In
Thread Starter
Join Date: Aug 2008
Location: ashland ky
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Hey dude, you are just a concerned member for everyone on here. I am glad LSX people are like a brotherhood. Bygod most of the mustang guys dont give a **** like you guys do. I spoke with my friend for hours trying to trace the problem and we found it. However it would take a couple months to correct. I might just keep it and fix the odometer problem and repaint the car. Only thing the interior needs is the seat bolster and i can get it pretty cheap from GM, around $300 which is the upper seat cover. Paint and detail the outside and a new car again.
And thanks for the offers however it takes $6000 to buy the car, firm. Only other offer i have concidered is the busa and i might go that route.
And thanks for the offers however it takes $6000 to buy the car, firm. Only other offer i have concidered is the busa and i might go that route.
10-02-2008, 09:13 AM
#29
Teching In
iTrader: (1)
Join Date: Jun 2003
Location: Weatherford, TX DFW
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
It is still availbe if you decide just PM me. I am supposed to have a few lookers this weekend it is fairly priced just depends on the folks. As you well know!!!
10-02-2008, 10:32 PM
#32
Teching In
Thread Starter
Join Date: Aug 2008
Location: ashland ky
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Well guys i am fixing the car. Going to get front and quarter fixed. Might have all over new paint when done but i am upping the price to $7500 firm. If anybody is interested in car before this weekend let me know asap because its getting fixed. Even then i might keep. Thanks for the interest. Any more pics let me know. I just know i could not get a deal like this when i was looking. Hell i give $10k for the car. The economy is killing our hobby in a bad and fast way.
No i am not going to pay for the cats. They fall under the emissions warranty. I think the warranty would cover the cats till 80k miles. Or you can use long tubes. The code that is set is converter efficiancy code.
No i am not going to pay for the cats. They fall under the emissions warranty. I think the warranty would cover the cats till 80k miles. Or you can use long tubes. The code that is set is converter efficiancy code.
Last edited by 1badlsx69; 10-02-2008 at 10:50 PM.
10-03-2008, 01:47 PM
#35
Teching In
Thread Starter
Join Date: Aug 2008
Location: ashland ky
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts