FS 2001 Z06 Corvette. 407+ rwhp Built LS6
10-07-2008, 06:18 PM
#1
Teching In
Thread Starter
Join Date: Jan 2008
Location: Charleston S.C.
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
FS 2001 Z06 Corvette. 407+ rwhp Built LS6 Well due to some other projects coming up I have decided to sell my 01 Z06. The car has 78k on it and the new motor has under 10k. This car is built ready for anything you want to throw at it. Here are the details...
· Z06 Black leather interior, with power memory seats.
· Dual zone climate control
· Cruise control
· 6 Speed manual (30mpg hwy @ 70mph)
· Selectable active traction control system with ABS and stability control
· Factory Bose Radio with 12 disc CD changer
· 18” C6 Z06 replica wheels
· Z06 floor mats and trunk mat
· Elite Engineering PCV oil catch can
· Halltech Intake system
· New clutch hydraulics
· T1 Swaybars front and rear
· B&M short throw shifter
· LAPD tunnel Plate
Motor
· 407+ rwhp 383 rwtq. LS6 Motor
o Factory LS6 block bored .005”
o Custom grind Comp Cam
§ adv dur. -283 287
dur. @.50 -243 287
lobe sep -113
lift -589 605
2002 LS-6 Block
3.905" Manley 2618 Forged Flat top Pistons w/2 valve relief,w/.927"
tool steel wrist pin
Total Seal Rings, Nitrous Steel Top ring, file fit for 200-250 HP shot,
Napier (tapered hook groove) second ring.
Crower 6.125" Steel H-beam rods with ARP8740 bolts, torqued by
elongation method.
Comp Cams custom ground camshaft 236/238 @.050 .605/.608 lift on a 113
LSA Installed straight up.
GM LS-7 roller lifters
Smith Brothers .083 wall hardened pushrods
Roll Master Billet double roller timing set
Melling 10295 standard volume race oil pump
LS-6 Nodular Iron Crank ground .010/.010
Clevite 77 H series rod and main bearings
Balanced Rotating Assembly
Durabond H series cam bearings
New GM main cap fasteners including cross bolts
All New GM gaskets with the exception of head gaskets
Cometic .040" MLS head gaskets
ARP 12 pt Head Studs
Patroit Performance CNC ported 243 LS-6 castings with Stainless valves
and .650 lift springs w/Ti retainers
New GM intake bolts
Factory LS-6 intake and TB
ARP 12pt Flywheel Bolts
Textralia Z-grip flywheel and clutch combination
All new clutch hydraulics
No Oil leaks what so ever
Excellent oil pressure, hot and cold
42 lbm/hr fuel injectors
LG long tube headers and corsa exhaust
***$22,800*** OBO
Located just out side Charleston Sc 29483
Send me a message here or call Brian @ 843-324-4847.
· Z06 Black leather interior, with power memory seats.
· Dual zone climate control
· Cruise control
· 6 Speed manual (30mpg hwy @ 70mph)
· Selectable active traction control system with ABS and stability control
· Factory Bose Radio with 12 disc CD changer
· 18” C6 Z06 replica wheels
· Z06 floor mats and trunk mat
· Elite Engineering PCV oil catch can
· Halltech Intake system
· New clutch hydraulics
· T1 Swaybars front and rear
· B&M short throw shifter
· LAPD tunnel Plate
Motor
· 407+ rwhp 383 rwtq. LS6 Motor
o Factory LS6 block bored .005”
o Custom grind Comp Cam
§ adv dur. -283 287
dur. @.50 -243 287
lobe sep -113
lift -589 605
2002 LS-6 Block
3.905" Manley 2618 Forged Flat top Pistons w/2 valve relief,w/.927"
tool steel wrist pin
Total Seal Rings, Nitrous Steel Top ring, file fit for 200-250 HP shot,
Napier (tapered hook groove) second ring.
Crower 6.125" Steel H-beam rods with ARP8740 bolts, torqued by
elongation method.
Comp Cams custom ground camshaft 236/238 @.050 .605/.608 lift on a 113
LSA Installed straight up.
GM LS-7 roller lifters
Smith Brothers .083 wall hardened pushrods
Roll Master Billet double roller timing set
Melling 10295 standard volume race oil pump
LS-6 Nodular Iron Crank ground .010/.010
Clevite 77 H series rod and main bearings
Balanced Rotating Assembly
Durabond H series cam bearings
New GM main cap fasteners including cross bolts
All New GM gaskets with the exception of head gaskets
Cometic .040" MLS head gaskets
ARP 12 pt Head Studs
Patroit Performance CNC ported 243 LS-6 castings with Stainless valves
and .650 lift springs w/Ti retainers
New GM intake bolts
Factory LS-6 intake and TB
ARP 12pt Flywheel Bolts
Textralia Z-grip flywheel and clutch combination
All new clutch hydraulics
No Oil leaks what so ever
Excellent oil pressure, hot and cold
42 lbm/hr fuel injectors
LG long tube headers and corsa exhaust
***$22,800*** OBO
Located just out side Charleston Sc 29483
Send me a message here or call Brian @ 843-324-4847.
Last edited by CBR-runner; 12-31-2008 at 05:23 AM.
10-09-2008, 06:27 PM
#4
Teching In
Thread Starter
Join Date: Jan 2008
Location: Charleston S.C.
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Its a 10.5:1 comp. The dyno pull was with a stock air box and only went to 6500rpm. now the car has a halltech intake and the rev limiter has been bumped to 7200. I'm waiting for my tuner to have some time to do another pull.
The next pull should be around 420ish.
any offers?
The next pull should be around 420ish.
any offers?
bump 
Trending Topics
10-16-2008, 08:13 PM
#15
Teching In
Thread Starter
Join Date: Jan 2008
Location: Charleston S.C.
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
I'm sorry. the bore was only done .005" to clean the bore. I was thinking of the other small block i just started working on. Original post fixed.
Last edited by CBR-runner; 10-17-2008 at 09:44 PM.
