2001 SS M6 H/C/I/E/and some serious paint!
#1
TECH Regular
Thread Starter
iTrader: (9)
Join Date: Jul 2008
Location: Knoxville, TN
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
2001 SS M6 H/C/I/E/and some serious paint!
https://ls1tech.com/forums/paint-bod...face-lift.html
NEW PRICE $13,000
This is my recently completed Heads cam car(BUILD THREAD AT THE TOP). the parts have roughly 2 miles (from test driving it in the neighborhood) and the paint has 0 Miles on it. I bought the car with 96,000 miles on it and it still has the same amount of miles on it.
Current setup
-TSP LS6 Stage 1 Heads
-MS4 Cam
-Crane Cams double timing Chain and gears
-42lb injectors
-FAST 90mm (direct port ready) Intake manifold
-FAST Rails with Speed Inc. Fuel rail instillation kit and fuel pressure gauge
-NICK WILLIAMS 90mm throttle body
-LS6 Vally Cover
-QTP Long tube race headers with velocity collectors
-Custom true duals kit (exactly like TSP's kit)
-MSD 8.5 wires
-Hurst white ball shift **** with WS6 store short stick
-chromoly 7.4 Pushrods
-ARP Head Studs
-Brand new Onyx black paint with clear from Sherwin Williams
-1969 "CAMARO" emblems with new nose emblem and clips
-All new motor sensors including IAT, PCV, Coolant Temp sensor, TPS.....
-Spoon Performance polyurethane motor and tranny mounts
THE CAR HAS BEEN TUNED!!!.......
463hp 437tq
I will be moving to texas (right outside of Houston), and due to budget issues I won't be able to keep this car for much longer. I put alot of effort and money into it, and I hope that whoever buys it will enjoy my hard work. Here are some pictures of the car right after the Paint work has been completed and some of the motor work.
New Price of $13,000..but then again, I'm pushed for time, so any offer will be considered post a price or pm me
NEW PRICE $13,000
This is my recently completed Heads cam car(BUILD THREAD AT THE TOP). the parts have roughly 2 miles (from test driving it in the neighborhood) and the paint has 0 Miles on it. I bought the car with 96,000 miles on it and it still has the same amount of miles on it.
Current setup
-TSP LS6 Stage 1 Heads
-MS4 Cam
-Crane Cams double timing Chain and gears
-42lb injectors
-FAST 90mm (direct port ready) Intake manifold
-FAST Rails with Speed Inc. Fuel rail instillation kit and fuel pressure gauge
-NICK WILLIAMS 90mm throttle body
-LS6 Vally Cover
-QTP Long tube race headers with velocity collectors
-Custom true duals kit (exactly like TSP's kit)
-MSD 8.5 wires
-Hurst white ball shift **** with WS6 store short stick
-chromoly 7.4 Pushrods
-ARP Head Studs
-Brand new Onyx black paint with clear from Sherwin Williams
-1969 "CAMARO" emblems with new nose emblem and clips
-All new motor sensors including IAT, PCV, Coolant Temp sensor, TPS.....
-Spoon Performance polyurethane motor and tranny mounts
THE CAR HAS BEEN TUNED!!!.......
463hp 437tq
I will be moving to texas (right outside of Houston), and due to budget issues I won't be able to keep this car for much longer. I put alot of effort and money into it, and I hope that whoever buys it will enjoy my hard work. Here are some pictures of the car right after the Paint work has been completed and some of the motor work.
New Price of $13,000..but then again, I'm pushed for time, so any offer will be considered post a price or pm me
Last edited by Sammyboy; 04-06-2009 at 04:49 PM.
#3
TECH Regular
iTrader: (1)
Join Date: Nov 2005
Location: Maryville,Tn
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
I can vouche for the time and effort put into this car since i have seen it first hand, and even lent a hand. It's damn clean, and the paint looks AMAZING in person. The attention to detail is awesome.
Free bump ttt for you sam. Good Luck with the sale.
Free bump ttt for you sam. Good Luck with the sale.