2006 Camo Honda Ruckus - Modified/2-stroke
#1
Thread Starter
TECH Regular
iTrader: (10)
Joined: Nov 2003
Posts: 420
Likes: 0
From: Joliet, IL / Virginia Beach, VA
2006 Camo Honda Ruckus - Modified/2-stroke
2006 Honda Ruckus. 2 stroke conversion. Runs great. Info and pics below. Asking $2,250 obo. Located in Virginia Beach, VA.
You can e-mail me at clowe696@yahoo.com for additional information.
mod list...
welded engine and shock mount from donor
70cc cast iron Malossi big bore kit. 2-stroke conversion
Athena HPC crankshaft
---stock carb and filter housing (Also have a new 19mm arreche carb to go with. Will need tunning for this carb as it is bigger)
Leo Vince SP3 exhaust
mikuni fuel pump
some racing variator and drive face from ebay
---top end went from 40 to 53
---(3)4g rollers and (3)6g rollers
stage 6 fuel meter and met sender
stage 6 dual stage filter
bosch relay for starter
radio shack relay mod
minarelli (cpi oliver) 12" wheels (painted with SEM trim black)
shinko white walls (130-70 and 120-70)
low down front shocks
daytona chrome shock (not pictured)
oem dio caliper and rotor
donor master cylinder (better braking than the oem dio MC)
braided front and rear brake cables
rear brake lever with e-brake
stage 6 left hand controls (trimmed oem right hand controls with backward kill switch)
koso mirrors (right one doesn't stay in placed so removed)
pwjdm pegs
kijima side stand (trimmed and rewelded because it's slammed)
rPro brace
diy lowered seat frame
R6 LED tail light and LED front signals
(2) 18W H4 headlights (no stator or charging problems)
trimmed oem tank belly protector
fake kitaco bar clamp from ebay
clubman bars (1" trimmed of each side)
gel pro grips
jody seat and (diy nut numb trim)
glossy camo BB
front and rear frame and seat frame painted gloss white (automotive paint shop)
Thank you for looking.
You can e-mail me at clowe696@yahoo.com for additional information.
mod list...
welded engine and shock mount from donor
70cc cast iron Malossi big bore kit. 2-stroke conversion
Athena HPC crankshaft
---stock carb and filter housing (Also have a new 19mm arreche carb to go with. Will need tunning for this carb as it is bigger)
Leo Vince SP3 exhaust
mikuni fuel pump
some racing variator and drive face from ebay
---top end went from 40 to 53
---(3)4g rollers and (3)6g rollers
stage 6 fuel meter and met sender
stage 6 dual stage filter
bosch relay for starter
radio shack relay mod
minarelli (cpi oliver) 12" wheels (painted with SEM trim black)
shinko white walls (130-70 and 120-70)
low down front shocks
daytona chrome shock (not pictured)
oem dio caliper and rotor
donor master cylinder (better braking than the oem dio MC)
braided front and rear brake cables
rear brake lever with e-brake
stage 6 left hand controls (trimmed oem right hand controls with backward kill switch)
koso mirrors (right one doesn't stay in placed so removed)
pwjdm pegs
kijima side stand (trimmed and rewelded because it's slammed)
rPro brace
diy lowered seat frame
R6 LED tail light and LED front signals
(2) 18W H4 headlights (no stator or charging problems)
trimmed oem tank belly protector
fake kitaco bar clamp from ebay
clubman bars (1" trimmed of each side)
gel pro grips
jody seat and (diy nut numb trim)
glossy camo BB
front and rear frame and seat frame painted gloss white (automotive paint shop)
Thank you for looking.