Turbocharged 327 S-10
#1
Teching In
Thread Starter
Join Date: May 2007
Location: kansas
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Turbocharged 327 S-10
Hey everyone, i have my single turbo S-10 out on the market right now just tring to see what kind of offers i can get. Its a 69 327 block with 350 heads, edelbrock Performer RPM intake, with a boost built holley 650 double pumper. The ignition is a mallory distributor with msd coil. 8.8 MM wires, colder range spark plugs. The trans is a purpose built 700R4 with shift kit, corvette servos, upgraded everything really. Its got a 4.10 rear end. The truck has a custom dash with gauges, oil pressure, water temp, speedo, boost/vac, fuel pressure and a/f gauge. Tach is mounted on the top of the dash. The rolling stock is a staggered set of 18 and 20 inch zinik shoguns on nitto 555 tires, less than 5000 miles on the wheel and tire combo. The truck was painted in January it has been wet sanded and buffed but could use another go over with some 1800 grit and then rebuffed. The truck is fully shaved, with cadillac tail lights, the tail gate is welded shut, door handles gone with poppers installed. Wow this is getting long. it has a 3/3 drop with spindles and the weight helped lower the front, with 3 inch blocks in the back. I am looking for something different to drive. The motor and trans has around 500 miles total. So shoot me some offers. If i sell outright i would like 11500
Last edited by LowDime; 05-18-2007 at 11:16 PM.
Trending Topics
#9
I would really like to see a picture with the full truck in it, also different angles if you dont mind thanx.
Last edited by Reno_911; 05-23-2007 at 08:39 AM. Reason: missspell