1980Z28 camaro 3200
#1
TECH Resident
Thread Starter
iTrader: (7)
Join Date: Feb 2007
Location: Visalia, Ca
Posts: 993
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
1980 Z28 H.O. 305 California Car
Fresh rebuild about year and a half ago, spun a rod bering (motor sat for 2 years i had a 327 non smog motor in it for 2 years)
Crank was checked/ polished .10/.20 i think i have the reciept
New Stock Pistions .30 over
Stock Rods
Engine was put back together with (FEM-MHP126-300 from summit -pistons)
New Stock Push Rods
New Summit lifters
Stock cam
Head's were reworked double valve seals on intake (new stock springs)
New oil pump from summit kit
Stock HEI new plugs/ Wire
Tranny is stock th350 does leak fluid when you dont drive it say after 4 days it will start leaking
Rear End is stock drained/ replaced fluid last year
I do not have the time to finish/ tinker with it, cannot get it to smog i can make copy's of the results the computer isnt hooked up, but passed 3 years ago when i put the brand new rodchester on it
Was an a/c car wiring was cut (still have wires)
needs an a/c delete box cover americangrafitti has them
Interior is clean needs head liner/visors new carpet, back deck lid rear seats are in great condition front seats are from a 89 rx-7 normal wear rip on drivers seat center consol needs to be finished/ covered
speedometer cluster is out of a rs due to broken needles and bad odo. (i think the old one is at my bro's house)
im asking 3,200 O.B.O will look in to trades
Pm for phone # or more detailed pictures/ video's
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_310.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_311.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_312.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_313.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_314.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_315.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_316.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_322.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_321.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_320.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_319.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_317.jpg)
Fresh rebuild about year and a half ago, spun a rod bering (motor sat for 2 years i had a 327 non smog motor in it for 2 years)
Crank was checked/ polished .10/.20 i think i have the reciept
New Stock Pistions .30 over
Stock Rods
Engine was put back together with (FEM-MHP126-300 from summit -pistons)
New Stock Push Rods
New Summit lifters
Stock cam
Head's were reworked double valve seals on intake (new stock springs)
New oil pump from summit kit
Stock HEI new plugs/ Wire
Tranny is stock th350 does leak fluid when you dont drive it say after 4 days it will start leaking
Rear End is stock drained/ replaced fluid last year
I do not have the time to finish/ tinker with it, cannot get it to smog i can make copy's of the results the computer isnt hooked up, but passed 3 years ago when i put the brand new rodchester on it
Was an a/c car wiring was cut (still have wires)
needs an a/c delete box cover americangrafitti has them
Interior is clean needs head liner/visors new carpet, back deck lid rear seats are in great condition front seats are from a 89 rx-7 normal wear rip on drivers seat center consol needs to be finished/ covered
speedometer cluster is out of a rs due to broken needles and bad odo. (i think the old one is at my bro's house)
im asking 3,200 O.B.O will look in to trades
Pm for phone # or more detailed pictures/ video's
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_310.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_311.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_312.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_313.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_314.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_315.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_316.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_322.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_321.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_320.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_319.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_317.jpg)
![](http://i151.photobucket.com/albums/s143/Krischris5/IMAGE_318.jpg)
Last edited by letsrun97z; 12-20-2007 at 11:04 PM. Reason: other info. update
Trending Topics
#14
On The Tree
Join Date: Nov 2007
Location: Summerside, PE, Canada
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
#16
TECH Resident
Thread Starter
iTrader: (7)
Join Date: Feb 2007
Location: Visalia, Ca
Posts: 993
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
[QUOTE=ahhwataday;8660460]looks like my first car. This is before a bath. I might take this off of your hands if you were in VA.
i wish i wounldnt have thrown away the front ground effects and mud flaps i was young and thought it looked okey. then last year the stock hood unlatched on the freeway and buckled
i wish i wounldnt have thrown away the front ground effects and mud flaps i was young and thought it looked okey. then last year the stock hood unlatched on the freeway and buckled