1988 2.3 Turbo Mustang FS/FT
#1
1988 2.3 Turbo Mustang FS/FT
I have an 88 Hatch 5sp.
-SDS standalone with 75lbrs
-MSD 6A
-Shortblock with 5.5 Crower rods and Diamond stock dish pistons...
-Oval port head with big valves and ported by Esslinger and a a Engle cam with about .480 lift, solid roller
-HE351 Turbo
-Custom log header with bobs gutter ,rotated ported intake manifold.
-Ghetto *** exhaust and intercooler piping
-BIG intercooler
-Maximum motorsports ADJ Panhard Bar
-Maximum motorsports LCAs with spherical bearins on both ends
-Evolution Msport 3 link conversion
-MM full length SFCs.
-8.8 with 3.55s
The paint is crap.
Also has an Ohio rebuilt salvage title.
Front right shot exterior
http://i205.photobucket.com/albums/b...8/P7080002.jpg
Rear exterior.
http://i205.photobucket.com/albums/b...8/P7080019.jpg
Rear left exterior
http://i205.photobucket.com/albums/b...8/P7080018.jpg
LM1 wideband and tuning controller
http://i205.photobucket.com/albums/b...8/P7080003.jpg
The Office.
http://i205.photobucket.com/albums/b...8/P7080004.jpg
Engine bay
http://i205.photobucket.com/albums/b...8/P7080005.jpg
Some of my CAI/I/C piping.
http://i205.photobucket.com/albums/b...8/P7080006.jpg
HY35 turbo
http://i205.photobucket.com/albums/b...8/P7080008.jpg
another engine shot.
http://i205.photobucket.com/albums/b...8/P7080010.jpg
Exhaust 1
http://i205.photobucket.com/albums/b...8/P7080011.jpg
Exhaust 2
http://i205.photobucket.com/albums/b...8/P7080012.jpg
Exhaust 3
http://i205.photobucket.com/albums/b...8/P7080013.jpg
Exhaust 4
http://i205.photobucket.com/albums/b...8/P7080014.jpg
Some of the suspension
http://i205.photobucket.com/albums/b...n/P8200102.jpg
Asking $7k OBO.
Additionally I'm interested in trading for a bike or interesting car....manual transmission and RWD/AWD only if its a car, please.
-SDS standalone with 75lbrs
-MSD 6A
-Shortblock with 5.5 Crower rods and Diamond stock dish pistons...
-Oval port head with big valves and ported by Esslinger and a a Engle cam with about .480 lift, solid roller
-HE351 Turbo
-Custom log header with bobs gutter ,rotated ported intake manifold.
-Ghetto *** exhaust and intercooler piping
-BIG intercooler
-Maximum motorsports ADJ Panhard Bar
-Maximum motorsports LCAs with spherical bearins on both ends
-Evolution Msport 3 link conversion
-MM full length SFCs.
-8.8 with 3.55s
The paint is crap.
Also has an Ohio rebuilt salvage title.
Front right shot exterior
http://i205.photobucket.com/albums/b...8/P7080002.jpg
Rear exterior.
http://i205.photobucket.com/albums/b...8/P7080019.jpg
Rear left exterior
http://i205.photobucket.com/albums/b...8/P7080018.jpg
LM1 wideband and tuning controller
http://i205.photobucket.com/albums/b...8/P7080003.jpg
The Office.
http://i205.photobucket.com/albums/b...8/P7080004.jpg
Engine bay
http://i205.photobucket.com/albums/b...8/P7080005.jpg
Some of my CAI/I/C piping.
http://i205.photobucket.com/albums/b...8/P7080006.jpg
HY35 turbo
http://i205.photobucket.com/albums/b...8/P7080008.jpg
another engine shot.
http://i205.photobucket.com/albums/b...8/P7080010.jpg
Exhaust 1
http://i205.photobucket.com/albums/b...8/P7080011.jpg
Exhaust 2
http://i205.photobucket.com/albums/b...8/P7080012.jpg
Exhaust 3
http://i205.photobucket.com/albums/b...8/P7080013.jpg
Exhaust 4
http://i205.photobucket.com/albums/b...8/P7080014.jpg
Some of the suspension
http://i205.photobucket.com/albums/b...n/P8200102.jpg
Asking $7k OBO.
Additionally I'm interested in trading for a bike or interesting car....manual transmission and RWD/AWD only if its a car, please.
Last edited by EspaceF1Fan; 07-08-2008 at 10:12 PM.
#3
TECH Regular
iTrader: (2)
Join Date: Jul 2005
Location: Broomall, PA
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
Do you have any hp/tq numbers for the engine? 1/4 mile times? It appears that the engine would be a selling point of this car. I am a big fan of the foxes, but 7k for a salvage that needs some resto work title seems a little steep. I am just hoping to give a little advice. Your car has nice potential, I hope you have good luck with your sale!
Last edited by Tuffguy610; 07-11-2008 at 12:21 PM. Reason: .
#4
No Numbers....I have some kills.. and a nice benchmark
At 28psi with the older messed up throttle body
Kills:
-Two 100shot LS1 autos from 30 -130 or so- tore them a new *******
-Was still pulling ona cam/longtube /exchaust ls1 M^ with 3.73s at 140..
-
Benchmark.
Runs on the back bumper of a 150shot M6 2002 WS6 with 3.73s, longtubes, TSP true dual x pipe setup. froma dig all the way to 130. Aerodynamics takes over after that...
As for the price its NOT firm, just kind of a starting point for negotiations of a VERY fast(for a 4 cylinder full interior pump gas street car.)
Parts alone add up to atleast $7k(and I'm being VERY conservative in this estimate.)
At 28psi with the older messed up throttle body
Kills:
-Two 100shot LS1 autos from 30 -130 or so- tore them a new *******
-Was still pulling ona cam/longtube /exchaust ls1 M^ with 3.73s at 140..
-
Benchmark.
Runs on the back bumper of a 150shot M6 2002 WS6 with 3.73s, longtubes, TSP true dual x pipe setup. froma dig all the way to 130. Aerodynamics takes over after that...
As for the price its NOT firm, just kind of a starting point for negotiations of a VERY fast(for a 4 cylinder full interior pump gas street car.)
Parts alone add up to atleast $7k(and I'm being VERY conservative in this estimate.)
#6
Right now bad gas and a cap and rotor I think. I'm replacing the cap and rotor on the 15th...
Also retuning the car at that time to accomodate the slightly larger throttle body.
Also the heater blower is acting up. Might be the switch, or the motor, not sure..just discovered it doesnt work anymore in the rain yesterday when my windows were foogging up..lol
The vent selector still works, though.
Also retuning the car at that time to accomodate the slightly larger throttle body.
Also the heater blower is acting up. Might be the switch, or the motor, not sure..just discovered it doesnt work anymore in the rain yesterday when my windows were foogging up..lol
The vent selector still works, though.
Trending Topics
#9
Only issue left on the car is the heater blower motor, and a valve cover gasket which will be replaced this week.
The car has a a decent tune, only the startup and warm up tune needs work.
The car averages 24-27 mpg on the highway at 75-80mph.
This car is STILL for sale....I really want a motorcycle of some kind,though. Especially if it comes with luggage.
Also the car is Near Virginia Beach,Va until mid December...
The car has a a decent tune, only the startup and warm up tune needs work.
The car averages 24-27 mpg on the highway at 75-80mph.
This car is STILL for sale....I really want a motorcycle of some kind,though. Especially if it comes with luggage.
Also the car is Near Virginia Beach,Va until mid December...
#18
I have a 05 R6... (link - https://ls1tech.com/forums/vehicles-sale-non-lsx-powered/980421-fs-ft-2005-yamaha-r6-4500-obo.html)
Take a look. The price might be dropping soon enough, but more looking to sell than trade. Bike is Located in Savannah, near Hunter Army Airfield.
What do you have in mind. Lets work something out!
John
Take a look. The price might be dropping soon enough, but more looking to sell than trade. Bike is Located in Savannah, near Hunter Army Airfield.
What do you have in mind. Lets work something out!
John
#20
11 Second Club
iTrader: (7)
Join Date: Jul 2004
Location: Wareham, MA
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
NNNNNNOOOOOOOOOOOO!!!!!!!!!! Dont do it Adam. lol. J/K. I can vouch for the quickness of the mustang. He liked to plant himself on my back bumper with my old set up that ran 11.5X's @ 126 all day long.