1969 SS 396 Chevelle body
#1
1969 SS 396 Chevelle body
1969 SS 396 Chevelle 4spd body. Frame boxed, reinforced, and powdercoated.
Body and tub in great shape
All hood hinges, bumper brackets, etc powdercoated
Energy Suspension urethane body mounts w/grade 8 bolts
Hotchkiss Master Suspension kit (tubular) w/Global West Lower control arms
QA-1 12 way adjustable shocks
Moog front end parts
Moser 12 bolt-33 splined axles, 800lb springs, C/F clutches, Timken bearings, 3.73, 1350 yoke, Aluminum cover, chrome moly tubes, 3.150" bearings
Baer 13" Track 1 kit w/ master cylinder
In-Line tube stainless lines front to back
Detroit Speed & Engineering 12.7-1 coated 600 P/S box-w/Pure Choice fittings and 3500lb hoses
" " " " lightweight wiper motor
PST aluminum driveshaft w/1350 joints and 400 style yoke-set up for BB and 400
Billett Specialties SLX-01 17"X8" fronts 17"X10" rears--matching steering wheel w/carbon fiber wrap
Nitto 455 rubber
Original GM fenders in the box
" GM full Quarters in the box
" GM grill in box
" GM headlight bezels in pkg
" GM door edge trim in pkg
New Dynacorn doors and trunk
Harwood 4" cowl-bolt on w/lightweight springs
Master A&M Softseal kit w/whiskers
OPG Parts-bumpers, chrome, bezels, running lights, tail lights, bolt kits, screw kits, gas tank, straps, cap, plastic inner fenders, much more
Ididit carbon fiber-tilt steering column
Griffin aluminum radiator-1 1/4" tubes
Trim Parts door handles, emblems, etc
Home for LSX?
Many extra parts, MAY PART OUT IF CANNOT SELL AS A WHOLE!
Was building car for Dad for Woodward, he passed away. I don't want to look at it anymore. Well in excess of $40,000.00. Asking a steel price of $22000.00. Won't take much to finish. I also have a 540, MSD 7AL-2 w/ crank trigger, & distributor, Lemmons 2 1/8"-2 1/4" X 4" stepped race hedders custom made for street-coated--only a few sets on planet, Torque-Tech 3 1/2" full exhaust w/stainless clamps, and Flowmasters, Spintech 14" long, 4" to 3.5" tapered reducers from hedders to exhaust. I WILL HAVE PICTURES SOON. PM FOR QUESTIONS, BRIAN.
Body and tub in great shape
All hood hinges, bumper brackets, etc powdercoated
Energy Suspension urethane body mounts w/grade 8 bolts
Hotchkiss Master Suspension kit (tubular) w/Global West Lower control arms
QA-1 12 way adjustable shocks
Moog front end parts
Moser 12 bolt-33 splined axles, 800lb springs, C/F clutches, Timken bearings, 3.73, 1350 yoke, Aluminum cover, chrome moly tubes, 3.150" bearings
Baer 13" Track 1 kit w/ master cylinder
In-Line tube stainless lines front to back
Detroit Speed & Engineering 12.7-1 coated 600 P/S box-w/Pure Choice fittings and 3500lb hoses
" " " " lightweight wiper motor
PST aluminum driveshaft w/1350 joints and 400 style yoke-set up for BB and 400
Billett Specialties SLX-01 17"X8" fronts 17"X10" rears--matching steering wheel w/carbon fiber wrap
Nitto 455 rubber
Original GM fenders in the box
" GM full Quarters in the box
" GM grill in box
" GM headlight bezels in pkg
" GM door edge trim in pkg
New Dynacorn doors and trunk
Harwood 4" cowl-bolt on w/lightweight springs
Master A&M Softseal kit w/whiskers
OPG Parts-bumpers, chrome, bezels, running lights, tail lights, bolt kits, screw kits, gas tank, straps, cap, plastic inner fenders, much more
Ididit carbon fiber-tilt steering column
Griffin aluminum radiator-1 1/4" tubes
Trim Parts door handles, emblems, etc
Home for LSX?
Many extra parts, MAY PART OUT IF CANNOT SELL AS A WHOLE!
Was building car for Dad for Woodward, he passed away. I don't want to look at it anymore. Well in excess of $40,000.00. Asking a steel price of $22000.00. Won't take much to finish. I also have a 540, MSD 7AL-2 w/ crank trigger, & distributor, Lemmons 2 1/8"-2 1/4" X 4" stepped race hedders custom made for street-coated--only a few sets on planet, Torque-Tech 3 1/2" full exhaust w/stainless clamps, and Flowmasters, Spintech 14" long, 4" to 3.5" tapered reducers from hedders to exhaust. I WILL HAVE PICTURES SOON. PM FOR QUESTIONS, BRIAN.
Last edited by 382ssz28; 07-27-2008 at 01:59 PM.
#2
Chavelle pics
1-Passenger body-2-Driver body-19-GM full passeger quarter-20-GM full driver quarter-21-OPG plastic inner fenders-7-DSE coated 600 series coated 12.7-1 power steering box-002-Moser 12 bolt,QA1 12 way adjustable shocks, stainless lines-DSE lightweight wiper motor-10-PST aluminum driveshaft w/1350 joints/400 yoke-8-Baer brakes, spindles, inner tie rods
#3
Chevelle pics
9-Dynacorn trunk-3-Dynacorn driver door-4-Dynacorn passenger door-11-GM grill and corner pcs-12-A&M Soft Seal kit & gaskets-13-Light bezels, coated brackets-14-OPG bumpers w/GM license plate retainer-15-Fisher moldings, tail lights, and chrome-16-Emblems, side mirrors, dome light-17-GM headlight trim, door edge guards, chrome.
#4
Chevelle pics
18-Body chrome-grill, tail, wheel moldings, etc.-22-Front valance-23-Ididit carbon fiber tilt column and all parts-24-Ididit column-26-Billet Specialities steering wheel w/carbon fiber wrap and horn w/emblem-013 SLX01 Billet Specialities rims and Nitto 455 rubber-018-Spintech reducers and stainless band clamps-019-Torquetech 3.5" mandrel bent full exhaust-005-Lemmon's Hedders, 2 1/8" to 2 1/4" stepped coated hedders-020-Flowmaster mufflers.
#5
Extra parts-Chevelle pics
006-540-015-MSD 7AL2, crank trigger, distributor, Taylor 135* wires-005-Lemmon's Hedders installed-016-Flex-a-light Extreme fan-021-Aeromotive master fuel system w/cycling computer. motor has Jesel belt drive, Dart Pro 1's, 380-302 cfm, 2.30"-1.88", ported by Shaffiroff, Lunati 4.25" crank internal balanced,(Mallory Metal), Eagle 6.3850" rods w/L-19 bolts, J&E 10.6-1 pistons, Merlin 2 block, Edelbrock 2927 intake,(port matched by Koffel's), Milodon pan,(made 26 hp on dyno), ARP studed thruout, much more. Motor is estimated @ 740hp-700lbs on93 octane.
Last edited by 382ssz28; 07-25-2008 at 03:25 PM.
#6
This car is a bodyman's dream. We all know what this stuff goes for. I will sell the motor,(set up for street), and related parts separate right now, ignition, pipes, hedders, etc. Perfect for an LSX w/turbo or ? Look at bodies found in field, $5000.00-$10,000.00 at Super Chevy show. This car has 85%. I was going to put a Corbeau and leather interior. Needs wiring, (American Autowire), paint, and assembly. I will be out of town for 2 weeks at school. My # 231-218-4901. I will check computer when I can. Over $70,000.00 + labor invested. Make reasonable offers, please don't insult. I have enough pain already. Who wants to finish a dream?