Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: May 2015
Location: La Habra, Ca. 90631
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build
Trying to replace my 01 Z28 that was totalled back in February. Still haven't gotten any settlement offer from the insurance company but I really could use a vehicle to at east start building back toward normal again as I wait on the lawyers to work their magic.
I have limited funds to say the least, but am well-off in tools and parts to trade or sell (with funds put towards buying a good amount of potential).
I'm sure I'll miss some items that I have available for sale or trade, but ill pupdat this thread a I remember them:
OTC Encore MidRange Scanner with Bravo 2.0 update (comes with charging cable, usb cable and Bravo 2.0 cpompatible OBD2 cable
Bosch Mastertech Vehicle Communication Interface (comes with power cable, usb cable, MVCI compatible OBD2 Cable
Diablosport Tuner plus PCM that its currently married to. (Just needs to bepowered up with pcm to reinstall the factory tune and then both are free to separate)
BCM
ABS Module
3.91 gears for 10bolt
Rearend bearing set
Oil Cooler & Manual Steering upper radiator hose for OEM ps bs delete/upgrade/relocation
3 pairs of 4th gen fbody ttops
one full ttop conversion kit, 1/2 of a 2nd set
rack & pinion (never installed)
ebony interior pieces, just needs the 2 lower front sections to be complete
mild ported/polished ls1 oe throttle body
cmaro wing with rs-style spoiler (with end pieces and 3rd brake lens)
Berger panel, silver painted "camaro" prep work very well done by hand
aPair of c6 base model corvette fenders
custom sub enclosure (fits in ttop storage area) 2 12" subs and 500waqtt amp
interior bezels (2tone painted pewter/black to match the body of the 01 z28 cube)
flowmaster 80series with fatty angle cut chrome tps
passenger window glass
02 sensor
pir of gray front seats
kyb excel shocks - rear
rear brake calipers
6 jugs of autozone dexcool (concentrated)
will update more parts a little later
for the most part the parts are for 4th gen fbodies, z28s specifically 98-02,. pm me with questions, interest, etc
I have limited funds to say the least, but am well-off in tools and parts to trade or sell (with funds put towards buying a good amount of potential).
I'm sure I'll miss some items that I have available for sale or trade, but ill pupdat this thread a I remember them:
OTC Encore MidRange Scanner with Bravo 2.0 update (comes with charging cable, usb cable and Bravo 2.0 cpompatible OBD2 cable
Bosch Mastertech Vehicle Communication Interface (comes with power cable, usb cable, MVCI compatible OBD2 Cable
Diablosport Tuner plus PCM that its currently married to. (Just needs to bepowered up with pcm to reinstall the factory tune and then both are free to separate)
BCM
ABS Module
3.91 gears for 10bolt
Rearend bearing set
Oil Cooler & Manual Steering upper radiator hose for OEM ps bs delete/upgrade/relocation
3 pairs of 4th gen fbody ttops
one full ttop conversion kit, 1/2 of a 2nd set
rack & pinion (never installed)
ebony interior pieces, just needs the 2 lower front sections to be complete
mild ported/polished ls1 oe throttle body
cmaro wing with rs-style spoiler (with end pieces and 3rd brake lens)
Berger panel, silver painted "camaro" prep work very well done by hand
aPair of c6 base model corvette fenders
custom sub enclosure (fits in ttop storage area) 2 12" subs and 500waqtt amp
interior bezels (2tone painted pewter/black to match the body of the 01 z28 cube)
flowmaster 80series with fatty angle cut chrome tps
passenger window glass
02 sensor
pir of gray front seats
kyb excel shocks - rear
rear brake calipers
6 jugs of autozone dexcool (concentrated)
will update more parts a little later
for the most part the parts are for 4th gen fbodies, z28s specifically 98-02,. pm me with questions, interest, etc
#2
Teching In
Thread Starter
iTrader: (1)
Join Date: May 2015
Location: La Habra, Ca. 90631
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
ta performance girdle diff cover for 10bolt rear
random turbo parts off of an audi/vw, mazda
cowl induction - fiberglass (off of 77 el camino)
bed upper chrome trim off of 77 el camino (one corner piece away from completing upper trim)
random turbo parts off of an audi/vw, mazda
cowl induction - fiberglass (off of 77 el camino)
bed upper chrome trim off of 77 el camino (one corner piece away from completing upper trim)
#3
#7
Teching In
iTrader: (1)
Join Date: Mar 2015
Location: West deptford NJ
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
I am parting my car. I still have the LT1 383 I pulled with AFR heads. motor is seperated(heads off) selling short block with forged internals and heads , together or seperate. have harness , pcm, everything but lifters and pushrods. motor made 395 RWHP on dyno.
Trending Topics
#8
I have a Texas speed built 408 nitrous car, all new motor, trans, rear end, suspension and electronics. Everything is literally brand new. Shoot me a pm of interested and I'll send you pics, a list of everything and anything else you want to know. Like I said everything is brand new I just lost interest
#9