does anyone have this part???
03-09-2009, 07:45 PM
#1
On The Tree
Thread Starter
iTrader: (6)
Join Date: Feb 2007
Location: hell
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
does anyone have this part??? i have asked before and got some replys! yet no part! so lets try this again.
i need the front fender mounting bracket for the drivers side (left). it is the one that rivits to the front of the fender behind the headlight.
i have gone to the dealer and pulled every # on the picture sheet and it's not one of them! the dealer says it comes with the fender? yet others have said no? either way, the dealer can not get this parts, and i have checked all the local junk yard and no go!
here is some pics of the passenger side one, if anyone has this bracket? please pm me! this is the one thing stopping me from putting the hood on
thxs jeff
i need the front fender mounting bracket for the drivers side (left). it is the one that rivits to the front of the fender behind the headlight.
i have gone to the dealer and pulled every # on the picture sheet and it's not one of them! the dealer says it comes with the fender? yet others have said no? either way, the dealer can not get this parts, and i have checked all the local junk yard and no go!
here is some pics of the passenger side one, if anyone has this bracket? please pm me! this is the one thing stopping me from putting the hood on
thxs jeff
03-09-2009, 07:56 PM
#2
TECH Addict
iTrader: (3)
Join Date: Oct 2007
Location: Orange County
Posts: 2,542
Likes: 0
Received 0 Likes
on
0 Posts
i think i told you this last time, dunno if you tried but go to the hardware store and look at utility shelf brackets. these things are nothing special, just a piece of metal with a 90degree bend.
03-09-2009, 08:05 PM
#3
On The Tree
Thread Starter
iTrader: (6)
Join Date: Feb 2007
Location: hell
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
it's not the bracket in front that bolts to the core support. it's the one that that bracket bolts too, that is behind the fender lip. you can barely see the bottom of it under the edge of the fender. it is held on by the two rivits you can see on the fender.
Trending Topics
03-09-2009, 08:41 PM
#9
On The Tree
Thread Starter
iTrader: (6)
Join Date: Feb 2007
Location: hell
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
no on both of those! they are the lower brackets for the front fenders. i can still get them from the dealer.
i have tryed ebay and craigslist and nothing!
i was hoping someone had a wrecked camaro (ls1) that the fender was junk but that bracket was ok?
i know someone has it! just got to get them to look!
i have tryed ebay and craigslist and nothing!
i was hoping someone had a wrecked camaro (ls1) that the fender was junk but that bracket was ok?
i know someone has it! just got to get them to look!
03-10-2009, 05:25 PM
#13
Sorry, I completely forgot to check that out for you. I will be at the kids house for the weekend again this weekend. Thats where my 1994~2002 conversion is located.
I'll check them for part numbers. If they don't have them, then I will try to trace/measure them for you. If I remember correctly there was nothing to them, other than a tapped extrusion, which you could just use a nut.
I'll check them for part numbers. If they don't have them, then I will try to trace/measure them for you. If I remember correctly there was nothing to them, other than a tapped extrusion, which you could just use a nut.
03-10-2009, 08:02 PM
#14
On The Tree
Thread Starter
iTrader: (6)
Join Date: Feb 2007
Location: hell
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, I completely forgot to check that out for you. I will be at the kids house for the weekend again this weekend. Thats where my 1994~2002 conversion is located.
I'll check them for part numbers. If they don't have them, then I will try to trace/measure them for you. If I remember correctly there was nothing to them, other than a tapped extrusion, which you could just use a nut.
I'll check them for part numbers. If they don't have them, then I will try to trace/measure them for you. If I remember correctly there was nothing to them, other than a tapped extrusion, which you could just use a nut.
thxs jeff
