Do not take your car to pep boys
#22
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Dam dude, atleast you only have one code... and someone to blame it on, lol.
I found that letting it sit in the drive way for a day tricks you into thinking its fixed, so maybe if you leave it there long enough, the car will think its fixed and bam, no more code.![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
I found that letting it sit in the drive way for a day tricks you into thinking its fixed, so maybe if you leave it there long enough, the car will think its fixed and bam, no more code.
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
Ohh the rear flat tire... that was caused by what looks like a piece of an exacto nife in the middle of the tire... I say they have poor shop prep and didn't clean up like they should have.. who knows I plugged the tire all is peachy now till I get a new set.
#23
TECH Fanatic
iTrader: (15)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Pep boys. hahah. They are a joke. After buying new tires and having them put on they tried to tell me that I needed to replace my distributor and it cost so much because it is way in the BACK of the motor under the cowl. ??? I was like really? Just finish my tires please.
#25
Staging Lane
iTrader: (7)
Join Date: Jul 2008
Location: O.C.
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah no.. didn't work I finally got it to flash and it tracked the cylinder to #2, apparently my spark plug wire has been sitting right on the primary coming from cyl. 2 and it has now melted the nice MSD wire I had, and who knows if they actually touched it, some of my wires were lose and I check them before I race, and the last time I drove it there were all snug as a bug in a rug.... who knows if they "checked" my spark plug wires or whatever.. doesn't matter it is fixed temporarily i will be buying some wire wrap for them.
#31
Teching In
iTrader: (11)
Join Date: Nov 2008
Location: Altoona, IA
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Pep Boys still sucks. FYI, even if you choose to take it to them for new tires they are going to pop your hood and **** with your ****. They call this a free inspection. It's total BS to get you to drop a lot of cash for random **** you can handle yourself in your driveway.
#33
TECH Fanatic
Join Date: Jun 2006
Location: Hayward CA
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
im a commercial manager at pepboys and i dont even let them touch my silverado nor my camaro.. this week they just blew a motor and another thing they did was ran over something and fucked up a oil pan!
#36
TECH Junkie
iTrader: (4)
Join Date: Feb 2007
Location: 805-818
Posts: 3,560
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well I know the guy that owns it, it wasn't pretty. He took the car there to use a lift because he's friends with a service tech and when he had to go run an pick up a part he forgot 5 mins away, this guy tried to move the honda off the lift and into another bay.....and fail.
#37
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So....
My friend send me a message on facebook of all places....
He pretty much uis saying that front tires wion't throw that code.. DUh thats a no brainer I told him it is the fact that I went there simply for tires and now my car isn't running right plus I had a piece of xacto knife stuck in my tire.
He then says maybe it was a prior issue caused before and it happen to occur after leaving there. Yes the melted wire is, but the two unplugged wires those were plugged in as I check that constantly.
He then says that I should not just be looking for someone to blame because my car isn't running right.
To the last part I said well I am sorry you feel that way but you know i don't run around blaming other people, I usually take the blame because I did something to my car other than what is a normal factory option therefore I am to blame if something goes wrong (aside from the actual cam itslef breaking into a million pieces or soemthing stupid like that). I guess i just lost a friend all because he has to stick up for the place he works at.
Ohh best part is I called him that day and asked "steve did anyone pop my hood or anything?" His reply "Yeah possibly why?" now he says that he never saw anyone pop the hood and was there the whole time... which i called him out because he and I were chatting with the service writer when they pulled the car in, then i went to look for a bulb and he was inside the store helping a customer when they started on my car.....
My friend send me a message on facebook of all places....
He pretty much uis saying that front tires wion't throw that code.. DUh thats a no brainer I told him it is the fact that I went there simply for tires and now my car isn't running right plus I had a piece of xacto knife stuck in my tire.
He then says maybe it was a prior issue caused before and it happen to occur after leaving there. Yes the melted wire is, but the two unplugged wires those were plugged in as I check that constantly.
He then says that I should not just be looking for someone to blame because my car isn't running right.
To the last part I said well I am sorry you feel that way but you know i don't run around blaming other people, I usually take the blame because I did something to my car other than what is a normal factory option therefore I am to blame if something goes wrong (aside from the actual cam itslef breaking into a million pieces or soemthing stupid like that). I guess i just lost a friend all because he has to stick up for the place he works at.
Ohh best part is I called him that day and asked "steve did anyone pop my hood or anything?" His reply "Yeah possibly why?" now he says that he never saw anyone pop the hood and was there the whole time... which i called him out because he and I were chatting with the service writer when they pulled the car in, then i went to look for a bulb and he was inside the store helping a customer when they started on my car.....
#38
TECH Junkie
iTrader: (4)
Join Date: Feb 2007
Location: 805-818
Posts: 3,560
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I guess he really feels tough standing up for a company of such worth and merit such as Pep Boys. Sucks you lost a friend that way.
But anyways, I guess its really true that when someone else works on your ride I believe I should be allowed to be present if I'm paying for it in case something comes up. I usually propose that its easier for me to learn that way if so and so doesn't mind that I watch.
This situation sucks, but so does Pep Boys, so just take it and move on....
But anyways, I guess its really true that when someone else works on your ride I believe I should be allowed to be present if I'm paying for it in case something comes up. I usually propose that its easier for me to learn that way if so and so doesn't mind that I watch.
This situation sucks, but so does Pep Boys, so just take it and move on....
#40
TECH Senior Member
iTrader: (36)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Pep boys. hahah. They are a joke. After buying new tires and having them put on they tried to tell me that I needed to replace my distributor and it cost so much because it is way in the BACK of the motor under the cowl. ??? I was like really? Just finish my tires please.
Yeah, it's in the very front of the block behind the water pump. They still rape you on replacement labor because the harmonic balancer and the water pump have to be removed to get the opti off. In theory it's a good design because it is driven right off the face of the cam, but in reality, it's not one of GM's best ideas...