Hey guys, new guy with a 97 Camaro
So have to wait a little longer... My intake awaits....
08-05-2010, 07:02 PM
#43
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
So going to try and spend some time on the Camaro again... Here is the cage, everything is removable complete bolt in cage.
I also decided to change the engine combo up a bit. Alum. block 9:1 compression and this thing.
BTW cage was pulled out to get coated the same color as car.
I also decided to change the engine combo up a bit. Alum. block 9:1 compression and this thing.
BTW cage was pulled out to get coated the same color as car.
08-06-2010, 01:16 AM
#49
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
My fabricator, you can pm me if you want.
I just work on the car on my free time, lately hasn't been much. I dont care what the dyno says, the ET and MPH will tell me how its doing. 
Probably not though...
08-07-2010, 07:32 PM
#52
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Have the FMIC halfway mounted, need to make some brackets for the bottom part and made some mesh type grill for the center of the bumper. Will also be welding some 3" vband connections on each side of the intercooler.
Being this will be a daily driver and I hate road noise we threw this in.
Being this will be a daily driver and I hate road noise we threw this in.
08-08-2010, 04:30 PM
#55
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
I would say about one more month. The heads just got finished up and we will start on the hot side this week to fit on the dummy engine. Shortblock is about 1week out.
Thanks for the compliments guys.
Thanks for the compliments guys.
08-09-2010, 10:19 PM
#56
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
So the dummy engine is here, I will run it until the 402 is ready. Now we can start putting things together... This motor is a 5.7, 10:3 compression, cnc heads, and a cam.
Last edited by 97 LS3; 08-09-2010 at 10:24 PM.
08-13-2010, 01:13 AM
#58
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Modified the fans to fit the radiator..
V-band on the turbo, intercooler, and -20 fittings on the radiator.
Fuel lines routed for the return set up..
FP regulator mounted and lines running through the strut tower.
V-band on the turbo, intercooler, and -20 fittings on the radiator.
Fuel lines routed for the return set up..
FP regulator mounted and lines running through the strut tower.
