Attention: Everyone that had Don Lee's install there H/C package need advise please..
07-14-2005, 09:35 PM
#1
Attention: Everyone that had Don Lee's install there H/C package need advise please.. Hey all:
I had Don Lee's install there 224/224 cam. I also have all the bolt on's along with LT headers, y-pipe with hi-flowcats.
I am now looking into doing heads.
I am having Don Lee's install teh heads but have a very inportant question.
Should I purchase Don Lee's ported and polished heads or get some after market ones? Don Lee's cost $1,700 for these own type heads.
I really need some good input here and wanted some advise. Please chime in and let me know if you got his head and cam package and what you thought and what kind of power you got.
Thanks
I had Don Lee's install there 224/224 cam. I also have all the bolt on's along with LT headers, y-pipe with hi-flowcats.
I am now looking into doing heads.
I am having Don Lee's install teh heads but have a very inportant question.
Should I purchase Don Lee's ported and polished heads or get some after market ones? Don Lee's cost $1,700 for these own type heads.
I really need some good input here and wanted some advise. Please chime in and let me know if you got his head and cam package and what you thought and what kind of power you got.
Thanks
07-14-2005, 10:57 PM
#2
TECH Fanatic
iTrader: (21)
Join Date: Oct 2004
Location: San jose, CA
Posts: 1,435
Likes: 0
Received 0 Likes
on
0 Posts
Damn bro you are really trying to find a answer with this thread. If I was you I would get some AFR 205 for like $500 more and you will know that you will get great result's. Just my opion and I hope you find your answer 
07-15-2005, 12:39 AM
#3
8 Second Club
iTrader: (11)
Join Date: Feb 2002
Location: (760) Phelan Ca.
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
I have ran their heads and cam and I made very good power.Enough to run 10.04@134 MPH with a stock short block.And only a 229 cam.Ran 7.0's in the 1/8 @ 98 MPH and 11.30's on the motor @ 122 mph.Zero drivability issues.
As for the AFR 205's out of the box they are not very good out of the box.They really require Porting to really get anything out of them.
So to awnser your ? yes I think that Don Lee's heads are a good set of heads.
As for the AFR 205's out of the box they are not very good out of the box.They really require Porting to really get anything out of them.
So to awnser your ? yes I think that Don Lee's heads are a good set of heads.
07-15-2005, 11:03 AM
#4
TECH Enthusiast
iTrader: (5)
Join Date: Jul 2004
Location: cali
Posts: 610
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1FASTBIRD
Damn bro you are really trying to find a answer with this thread. If I was you I would get some AFR 205 for like $500 more and you will know that you will get great result's. Just my opion and I hope you find your answer
the afr are well known Iam not trying to say that the other guys arent good, and besides if you were to go with either heads the afr's would be easier to sell because of the name, not a lot of people know the other guys heads.. I would spend the money and go with afr's
Trending Topics
07-21-2005, 12:48 PM
#8
Which heads are they using? 5.3, 5.7, etc. Or is it your choice?
I had DL install my h/c but my heads are APE and they suck!!!!
I am interested also in what you find out, I may have to have DL do up a set of heads for me as well. I like the way DL works. Tim actually saved me a ton of money when doing my h/c because I had parts listed that he said were too expensive for no/little gain and recommended I not buy them
I had DL install my h/c but my heads are APE and they suck!!!!
I am interested also in what you find out, I may have to have DL do up a set of heads for me as well. I like the way DL works. Tim actually saved me a ton of money when doing my h/c because I had parts listed that he said were too expensive for no/little gain and recommended I not buy them
