cali cam help guys.
01-25-2006, 06:20 PM
#24
Launching!
iTrader: (3)
Join Date: Nov 2001
Location: Long Beach, CA
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 01ls1lover
Were would i be able to get a futural cam? and i know i should change out the stock springs.. any recomindations?
As far as springs... depends on the lift of the cam. Comp 918 are good up to .600. But myself I wouldn't put em on any thing over .580.
01-25-2006, 06:32 PM
#25
SSU's Drunk Typing Whore
iTrader: (47)
Join Date: Jan 2004
Posts: 4,609
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RyRy
any one had any trouble with the 224/224 on a 112? I have an M6 and heard that the 112 was better for the manual.
The 112 will lope harder and have a earlier power band then the 114...should pass emissions as well - with a good tune atleast.
Otherwise its an awesome cam to have...a lot of people are real happy with it.
01-25-2006, 06:42 PM
#27
12 Second Club
Thread Starter
iTrader: (18)
Join Date: Jul 2004
Location: Nor Cal
Posts: 1,255
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 99Hugger
http://www.futralmotorsports.com/
As far as springs... depends on the lift of the cam. Comp 918 are good up to .600. But myself I wouldn't put em on any thing over .580.
As far as springs... depends on the lift of the cam. Comp 918 are good up to .600. But myself I wouldn't put em on any thing over .580.
Then what would you put on there...?
01-27-2006, 05:26 AM
#29
Launching!
iTrader: (28)
Join Date: Sep 2005
Location: Bay Area California
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
your sig says you have long tubes. correct me if i am wrong but arent Lt's illegal in Ca? they'll pass the sniffer of coarse but wont pass visual. i think it has to do with moving the stock location of the cats. since you're already illegal get the cam you want!!! just my opinion.
01-27-2006, 11:26 AM
#31
SSU's Drunk Typing Whore
iTrader: (47)
Join Date: Jan 2004
Posts: 4,609
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 67camaro
your sig says you have long tubes. correct me if i am wrong but arent Lt's illegal in Ca? they'll pass the sniffer of coarse but wont pass visual. i think it has to do with moving the stock location of the cats. since you're already illegal get the cam you want!!! just my opinion.
You are right with the relocation of the cats...
01-27-2006, 05:04 PM
#32
coil bind is at .660 for a 918 spring. I have them on my LT1 installed at 1.75 and I have .576 lift on the exhaust side. Granted that's about as close as you'd want to go, but you guys install them at 1.800, should be very safe at .580 for you.
Please do not post non-sponsor links.
Please do not post non-sponsor links.
Last edited by CRAGER; 04-14-2006 at 10:19 PM.