Phoenix F & Y Bodies FTMFW! *Week 9 - 7/17/06*
#822
Amusing anecdote:
I once turned a 6 cylinder car into a V8 car. Of course it was a 71 Nova so it was a piece of cake, except for that damned tiny 5/16 diameter fuel line. It was a customer car and I put a 406 in it like the customer wanted but he wouldnt spring for a bigger fuel line. Consequently, the thing wouldnt run much past 5K rpm (it was starving the carb). I charged him a fortune for his stupidity because it's twice as hard to do with the engine IN the car, but it ran fine after I fabbed a 1/2 diameter line with an electric pump back towards the tank.
I once turned a 6 cylinder car into a V8 car. Of course it was a 71 Nova so it was a piece of cake, except for that damned tiny 5/16 diameter fuel line. It was a customer car and I put a 406 in it like the customer wanted but he wouldnt spring for a bigger fuel line. Consequently, the thing wouldnt run much past 5K rpm (it was starving the carb). I charged him a fortune for his stupidity because it's twice as hard to do with the engine IN the car, but it ran fine after I fabbed a 1/2 diameter line with an electric pump back towards the tank.
#823
Here's what my mini-fridge looks like =)
And the door:
Just thought I'd share... It pays having parties at your house lol.
And the door:
Just thought I'd share... It pays having parties at your house lol.
Last edited by Azhigher; 07-21-2006 at 01:41 AM. Reason: Door too, and my feelings
#825
Originally Posted by WsSickLs6
You sound like my grandfather...
So, do you work, or are you retired???
IF you're older than Jeff, then you must be beyond the walker stage...
Have any mods on the Jazzy 1122???
So, do you work, or are you retired???
IF you're older than Jeff, then you must be beyond the walker stage...
Have any mods on the Jazzy 1122???
#827
Originally Posted by Z-Convert
I work like most everyone else. I'm getting on towards the walker stage, but am still able to walk from the recliner out the door to the car before I get to winded. Car has LT's, no cats and custom 3" y with electric cutout. I've been after Joel (Azhigher) to sell me his stall converter for like 6 months now. Someday....
#828
Originally Posted by Azhigher
Here's what my mini-fridge looks like =)
And the door:
Just thought I'd share... It pays having parties at your house lol.
And the door:
Just thought I'd share... It pays having parties at your house lol.
I could get real sloppy with some of that...especially that 151 over there, but i'd throw up if i smelled it...Beer FTW...I'll drink 2/3 of the beer in there and still walk around like a champ...
We should have a drinking festival soon...
#831
Originally Posted by WsSickLs6
I could get real sloppy with some of that...especially that 151 over there, but i'd throw up if i smelled it...Beer FTW...I'll drink 2/3 of the beer in there and still walk around like a champ...
We should have a drinking festival soon...
We should have a drinking festival soon...
#832
Joel: This figures. I can't get the hatch to close on the 89 (it's the electric kind and it stopped working - unlatched) and now I have to DD the 02. Well I guess you can have Sean do the R&R and I can pay for the previously agreed amount. At least then I'll have to verter and can put it in when I have the tme to have Sean do it.
#833
Originally Posted by WsSickLs6
ME???
where is the thread about saturday??? Can't find it
where is the thread about saturday??? Can't find it
#834
Originally Posted by Z-Convert
Joel: This figures. I can't get the hatch to close on the 89 (it's the electric kind and it stopped working - unlatched) and now I have to DD the 02. Well I guess you can have Sean do the R&R and I can pay for the previously agreed amount. At least then I'll have to verter and can put it in when I have the tme to have Sean do it.
#835
Originally Posted by Z-Convert
You might not care much for the AZFBA yet you still post there. I wonder why?
That board is exactly like AZSR for me, its just a laugh.