Looking into opening up a shop
09-14-2006 | 08:17 PM
#43
Originally Posted by craparo
stock gaskets though, like exhaust, intake o-rings, that kind of **** 
09-14-2006 | 08:22 PM
#44
Originally Posted by RyneZ06
well i will have that stuff stocked, but as for the buy-ins its going to be hard for a bit, i cant guarantee the best price, but i could guarantee the work will done properly, and be tuned properly.
as i have learned over and over again, spending that tiny bit extra (like 30$ on a price of part) is worth every penny having a shop that will truly stand behind their work.
09-14-2006 | 09:12 PM
#45
Originally Posted by craparo
as i have learned over and over again, spending that tiny bit extra (like 30$ on a price of part) is worth every penny having a shop that will truly stand behind their work.
09-14-2006 | 10:44 PM
#46
Originally Posted by craparo
as i have learned over and over again, spending that tiny bit extra (like 30$ on a price of part) is worth every penny having a shop that will truly stand behind their work.
09-14-2006 | 10:48 PM
#47
Originally Posted by RyneZ06
thats what i have learned, Ie: morgan motorsports, and they werent even that cheap
09-15-2006 | 03:09 AM
#51
Originally Posted by XpEdItIoUs
Good luck with the shop, I will sport a sticker on my car. Btw your spelling has improved
09-15-2006 | 06:16 AM
#52
Originally Posted by 2c5s
That's because everyone expects to get the parts for less than than suggested retail. In order to do that, you would have to do a "buy in" for the specific parts, like AFR 225's, as an example, let's say they dealer cost @ $2,000 per set with a min. buy in of 10 sets. That's $20,000 in inventory alone for one product. Then you get to wait to sell those while you have your capital tied up. Let's multiply that by the 10 hottest selling parts...... and look at the amount of money that's needed to have part'sn the shelf. It ain't cheap.
Just in case you have an extra couple hundred thousand laying aroud. 
09-15-2006 | 10:38 AM
#54
Originally Posted by AmericanMuscle313
I totally agree but I wasnt just talking about just the afr's. The point I was trying to make was that it would nice to have a shop in the Inland Empire that has smaller items that most places do not stock i.e. valvetrain parts, gaskets, seals, LS1 engine building tools, bolts, studs, etc. A couple 5 axis CNC mills for head porting wouldnt hurt either. Just in case you have an extra couple hundred thousand laying aroud.
Just in case you have an extra couple hundred thousand laying aroud. 
09-16-2006 | 12:11 PM
#57
stick around... there is always a monthly post about those morons..
or do a search on their name.. there have been MANY threads about those guys.. but they keep a low profile lately.. probably because they are on the Honda Boards trying to race 16sec cars with their 11 sec cars so they can feel rad..
NAAAAWWZZZ..
or do a search on their name.. there have been MANY threads about those guys.. but they keep a low profile lately.. probably because they are on the Honda Boards trying to race 16sec cars with their 11 sec cars so they can feel rad..
NAAAAWWZZZ..
09-16-2006 | 03:54 PM
#58
yeah i remember all the posts from before but i don see **** now.. if the search function would start workin id look again. i thought the threads with them and all of us chiming in were hilarious