Need a shop to build my car....
05-09-2007, 11:16 PM
#109
10 Second Club
iTrader: (44)
Join Date: May 2004
Location: Phoenix, AZ
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Alex @ CMS
I've designed 2 custom headers for Turbo DD and run 32psi daily on pump gas, i also have a 95mm Turbo waiting to go into my 93 TA, from design to fabrication we can take care of it.
Ryne the Owner is A Certified Mechanic and is responsible for his 434 Z06 corvette, 383 LT1 Trans Am, and 441 GTO. As far as tunning is concerned we have a solid relationship with Charlie Williams (responsible for Tunning the Highest HP corvettes on the west coast) tuner For A&A corvette, and WCC for any High HP Boosted motors.
Ryne the Owner is A Certified Mechanic and is responsible for his 434 Z06 corvette, 383 LT1 Trans Am, and 441 GTO. As far as tunning is concerned we have a solid relationship with Charlie Williams (responsible for Tunning the Highest HP corvettes on the west coast) tuner For A&A corvette, and WCC for any High HP Boosted motors.
05-09-2007, 11:42 PM
#111
TECH Enthusiast
Thread Starter
im going with the d1.....dont want too much hp that i wont be able to use. i dont think im gonna squeeze all of the hp im gonna get anyways. plus i only put about 5k miles per year on my fbods. ive had this one for 5months now and ive only put on 400 miles on it.
05-10-2007, 12:02 AM
#112
10 Second Club
iTrader: (44)
Join Date: May 2004
Location: Phoenix, AZ
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Alex @ CMS
No Idea.... ask him.....
J/k good luck with your shop ryne.
05-10-2007, 12:29 AM
#113
11 Second Club
iTrader: (3)
Join Date: Dec 2004
Location: Claremont, CA
Posts: 562
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by XpEdItIoUs
Im afraid to take my car there, what if i don't like his prices and i get slammed J/k good luck with your shop ryne.
J/k good luck with your shop ryne.Hhahahaha slammed. That sounds so wrong.
Rian needs a sign in his shop says like "Get SLAMMED!" or a tshirt maybe that says "The SLAMINATOR!"
You guys have an address exactly yet, or website with more info to read up about?
Alex. I promise, I won't stare any anyones asses, although I bet from all that slamming you guys have nice legs.
05-10-2007, 12:49 AM
#114
TECH Fanatic
iTrader: (1)
Join Date: Jun 2005
Location: East of LA
Posts: 1,071
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kbronSS
im going with the d1.....dont want too much hp that i wont be able to use. i dont think im gonna squeeze all of the hp im gonna get anyways. plus i only put about 5k miles per year on my fbods. ive had this one for 5months now and ive only put on 400 miles on it.
05-10-2007, 01:09 AM
#115
FormerVendor
iTrader: (18)
Join Date: Jan 2007
Location: Lost Angels, CA
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
Well Can't wait to come visit the shops, but first gotta get my first 1/4mile and perhaps a dyno run on the new engine. H-bday to me!!! hope to be in the 12 sec club with a weak run. we'll see let ya know sunday
Oh and where is that video of Travies xplotion
Oh and where is that video of Travies xplotion
05-10-2007, 03:04 AM
#116
Originally Posted by craparo
Hhahahaha slammed. That sounds so wrong.
Rian needs a sign in his shop says like "Get SLAMMED!" or a tshirt maybe that says "The SLAMINATOR!"
You guys have an address exactly yet, or website with more info to read up about?
Alex. I promise, I won't stare any anyones asses, although I bet from all that slamming you guys have nice legs.
Rian needs a sign in his shop says like "Get SLAMMED!" or a tshirt maybe that says "The SLAMINATOR!"
You guys have an address exactly yet, or website with more info to read up about?
Alex. I promise, I won't stare any anyones asses, although I bet from all that slamming you guys have nice legs.
05-10-2007, 03:54 AM
#117
11 Second Club
iTrader: (48)
Join Date: Jan 2006
Location: Corona, California
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WS6 Rampage
uuuhhh heres a thought,....Maybe Gus shouldn't have been beating on the damn car that weekend without a tune before Rob had an opportunity to build the tune for him at the dyno. Thats why it finally blew when Rob had it in his hands at the dyno!!!! ...... Again,.....NOT Rob's fault!
These are the ******* one sided stories I'm talking about!
These are the ******* one sided stories I'm talking about!
Just throwing this out there, but did Rob ever get a dyno? One thing that steered me away from him a few years back is he wanted to charge $450 Plus $200 for dyno time. I was like why should I pay for dyno time, and he said because he didnt have a dyno "In House" I would have to pay "ENTER SHOP NAME HERE" for their dyno time. Anyways I didnt think it was right for me to pay $650, after all it wasnt my fault he didnt have a dyno at his shop, you'd think if someone was going to be doing tuning, he would atleast have his own dyno. Once again not trying to start any ****, just pointing out a fact of why I never took it to him.
05-10-2007, 04:12 AM
#118
Originally Posted by Flash99
Just throwing this out there, but did Rob ever get a dyno? One thing that steered me away from him a few years back is he wanted to charge $450 Plus $200 for dyno time. I was like why should I pay for dyno time, and he said because he didnt have a dyno "In House" I would have to pay "ENTER SHOP NAME HERE" for their dyno time. Anyways I didnt think it was right for me to pay $650, after all it wasnt my fault he didnt have a dyno at his shop, you'd think if someone was going to be doing tuning, he would atleast have his own dyno. Once again not trying to start any ****, just pointing out a fact of why I never took it to him.
05-10-2007, 10:08 AM
#119
Originally Posted by craparo
Hhahahaha slammed. That sounds so wrong.
Rian needs a sign in his shop says like "Get SLAMMED!" or a tshirt maybe that says "The SLAMINATOR!"
You guys have an address exactly yet, or website with more info to read up about?
Alex. I promise, I won't stare any anyones asses, although I bet from all that slamming you guys have nice legs.
Rian needs a sign in his shop says like "Get SLAMMED!" or a tshirt maybe that says "The SLAMINATOR!"
You guys have an address exactly yet, or website with more info to read up about?
Alex. I promise, I won't stare any anyones asses, although I bet from all that slamming you guys have nice legs.
As far as my legs they are not much to look at
05-10-2007, 10:28 AM
#120
TECH Fanatic
iTrader: (1)
Join Date: Jun 2005
Location: East of LA
Posts: 1,071
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Stroker396
Well Can't wait to come visit the shops, but first gotta get my first 1/4mile and perhaps a dyno run on the new engine. H-bday to me!!! hope to be in the 12 sec club with a weak run. we'll see let ya know sunday
Oh and where is that video of Travies xplotion
Oh and where is that video of Travies xplotion
I remember a piece of my resonator hit one of the ***** DEEP guys in the face...lol