just curious...
Thread Starter
Joined: Aug 2008
Posts: 696
Likes: 0
From: Middletown, DE
just curious... Just curious to see if it would be for sale at any point in time and how much it would sell for....I know its a Fbody forum, but hell why not try
its a 93 chevy s10 with a 95z28 lt1/t56. The lt1 will have a 100% rebuild, bored .30 over, new crank kit, new rods, lt4 cam, block dipped, freeze plugs, ect.
motor has Custom CAI with k&n filter, ported intake and painted red, airfoil, AL heads, msd 8mm wires, shorty 1-5/8 headers. The tranny has a b&m short throw shifter too
Frame has been painted glossy black, truck will be painted 2001 onyx black. Body consists of 5% tint all around, 2 inch cowl hood, phantom grille, and molded rollpan.
Suspension is a 3/3 drop right now, blocks in the rear and 1inch coil/2 inch spindles upfront. Has a 8.5 rear with 4.10 gears and drilled/slotted rotors all around.
interior needs some tlc, has cavy seats swapped into it and interior is a workin project...so i wont bother with the bordum.
if you need pics let me know....just trying to see what it would be worth.
its a 93 chevy s10 with a 95z28 lt1/t56. The lt1 will have a 100% rebuild, bored .30 over, new crank kit, new rods, lt4 cam, block dipped, freeze plugs, ect.
motor has Custom CAI with k&n filter, ported intake and painted red, airfoil, AL heads, msd 8mm wires, shorty 1-5/8 headers. The tranny has a b&m short throw shifter too
Frame has been painted glossy black, truck will be painted 2001 onyx black. Body consists of 5% tint all around, 2 inch cowl hood, phantom grille, and molded rollpan.
Suspension is a 3/3 drop right now, blocks in the rear and 1inch coil/2 inch spindles upfront. Has a 8.5 rear with 4.10 gears and drilled/slotted rotors all around.
interior needs some tlc, has cavy seats swapped into it and interior is a workin project...so i wont bother with the bordum.
if you need pics let me know....just trying to see what it would be worth.
Thread Starter
Joined: Aug 2008
Posts: 696
Likes: 0
From: Middletown, DE
tell you the truth i havent taken it to the track, but from wat i have gathered, with traction, it should have run low 13s with the motor being stock besides the CAI, headers, ported intake and 4.10s....So with it being bored to 355cubic inches, full tru duals, mild lt4 cam, i would say again with traction could run like a 12.9....
Thread Starter
Joined: Aug 2008
Posts: 696
Likes: 0
From: Middletown, DE
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
Joined: Aug 2008
Posts: 696
Likes: 0
From: Middletown, DE