actACCORDingly

I'm Honestly not sure what this is worth. I'm debating on selling it just because i have an 800+awhp STi that has had my attention for the last 6 months. Its a 2000 v6 chassis, I'm the second owner. 91k on the chassis. It's completely ripped apart right now as it's getting caged. I wouldn't sell it without putting the interior back in and without painting the hood and bumper. The turbo kit is being built. Its already been paid for. I can change it at any time if someone is actually seriously interested. I have A LOT of money in the car right now. Just need to know what the car is worth if i do decide to sell it. The car is currently registered in Arizona. I live in Phoenix but it is located in Prescott at the chassis shop. The body is a 9.9/10 and the interior is 10/10.

Suspension:
Custom 10 point roll cage with door swing outs, dash bar. Cert to 8.50s
Flaming River manual steering kit
Team Z Metal Matrix (LSX) tubular k member
Team Z adjustable tubular front A arms
Team Z solid LSX engine mounts
Team Z Through the floor subframe connectors
Team Z adjustable lower control arms
Team Z adjustable upper control arms
Team Z X-treme Duty Anti-Roll Bar
Team Z Coilover Mount
Team Z Caster Camber Plates
Skinny Kid Race Cars Transmission Mount
Strange 10 way struts in front
UPR Coilover Kit
Strange Engineering Hypercoil 12-125 front coilover springs
Strange Single Adjustable Rear Coilovers
Team Z rear coilover mount
QA1 12-150 rear coilover springs
UPR Reinforced upper and lower torque boxes
14" Sheetmetal full width strutless drag wing
Skinny Kid Race Cars Parachute Kit
Stroud Parachute
Lakewood Driveshaft loop

Driveline/Drivetrain:
Built 1000hp TH400 2.48/1.52/1.00, Hipster Trans Brake, Reverse Manual Valve Body
Hurst Billet Pistol Grip Quarterstick shifter
Strange engineering 8.8 (cut down to foxbody width)
Welded Axle Tubes (3 passes per side)
Strange Engineering 4.30 gears (need to change)
Strange Engineering 35 Spline Full Spool
Strange Engineering 35 spline Axles
Strange Engineering spool bearings
Strange Engineering C Clip eliminators
Strange Engineering 1350 Chromoly Pinion Yoke
ARP 1/2" Extended Wheel Studs
Trickflow Differential Girdle

Engine:
Stock 2006 LQ4
Jeep Cherokee 3 Core Aluminum Radiator (fits under turbos so they can sit in the grill)

Turbo:
Front Facing turbo kit (both turbos in grill area
Twin GT45s
Front Facing V Band Turbo Manifolds
2x Tial MVR 44mm Wastegates
2x Tial Q 50mm bovs
Cxracing a2a 29x12x5 intercooler

Wheels and tires:
Stock GT Wheels to roll around on or i could throw in a set of CCW's depending on price (18x10, 18x12.5) polished lip, gold face, arp bolts.

Interior:
Bone Stock Interior
Full Interior, down to the factory alarm and back seat
Kirkey Drag Seat (driver)
Kirkby Economy Drag Seat 17.5" wide (passenger)
G Force 5 Point Harness'
Racecraft Seat Rails
Summit Racing Battery Relocation Kit
Moroso Solid State Relay

Exterior:
2004 Cobra Front Bumper
2004 Cobra Rear Bumper
2004 Cobra Headlights with Clear Reflectors
2004 Cobra Emblems
4" H.O Fibertrends Bolt on hood
14" RCS Customs sheetmetal full width strutless drag wing (only car with one)
Skinny Kid Race Cars Parachute Kit
Stroud Parachute
"Remove Before Flight" banner on chute
Moroso Battery Kill Switch

What is left. Wiring and ecu, Fuel, Cold Side Intercooler Piping (i may have this done, depends on price), torque converter, flex plate, driveshaft, drag wheels and tires.






Bad pic of the tranny but its the only one that i have. It actually went through 3 hours of paint prep lol








Before they started on the cage, i dont have any pics of the current progress. All you can see here is the subframe connectors.

408GT

iTrader: (2)

Good looking car. Looks to me like you have way to much $$ in it for it to be worth you selling it. And you won't get any good input from this WIW Section unless it's an original LS-based car (IMO).

Good luck with whatever you decide to do, but don't give it away!