Billet Specialties Street Lites 15" and 17" Info And Pricing
02-16-2009, 05:30 PM
#144
12 Second Club
iTrader: (4)
Join Date: Jan 2005
Location: Texas
Posts: 1,200
Likes: 0
Received 0 Likes
on
0 Posts
I know the SFI is a selling item on this wheel but its not a requirement for the street or for the type of racing I do. Or many for what it matters. Can anyone get a 17x4 without it? Or BS dont sell any wheel without the SFI sticker?
02-16-2009, 05:48 PM
#145
Banned
Thread Starter
iTrader: (10)
Join Date: Jan 2008
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
The 17x4 is not produced yet. So i can not say if it will be SFI cert or not. The other 17" wheels are not SFI.
The 15" Street Lites and the 15" Comp Series are Sfi Approved.
The 15" Street Lites and the 15" Comp Series are Sfi Approved.
02-16-2009, 06:37 PM
#146
10 Second Club
iTrader: (8)
SFI certification is certainly not a deal breaker for me. I was just curious as to what is is, and why some are and some arent. And what NHRA/IHRA rules say about them.
I will very likely get some 17X11 & 17X4 for my vette when they become available.
They look good, are priced right, and are light weight.
I will very likely get some 17X11 & 17X4 for my vette when they become available.
They look good, are priced right, and are light weight.
02-16-2009, 06:43 PM
#147
12 Second Club
iTrader: (4)
Join Date: Jan 2005
Location: Texas
Posts: 1,200
Likes: 0
Received 0 Likes
on
0 Posts
Well I like the style of these wheels especially with a narrowed rear. Im about to ditch my ABS and rear brakes for a different set up so I can run these. I drive on the street alot and need a sturdy wheel. How much for the front runners for the LS1? And do they take the regular shank lugnut?
02-16-2009, 06:46 PM
#148
12 Second Club
iTrader: (4)
Join Date: Jan 2005
Location: Texas
Posts: 1,200
Likes: 0
Received 0 Likes
on
0 Posts
Oh btw, What is the inner barrel diameter? Im looking at other vehicles with disk brakes. I have seen ford explorer brakes used before and I believe they cleared Weld wheels. If they do they should clear yours right?
02-16-2009, 08:41 PM
#150
Banned
iTrader: (22)
Join Date: Jan 2004
Location: Schaumburg,IL
Posts: 4,957
Likes: 0
Received 0 Likes
on
0 Posts
FATBOY
The 5/8 studs and spacers fit these wheels without an issue as Jason noted.
https://ls1tech.com/forums/wheels-ti...eet-lites.html
The 5/8 studs and spacers fit these wheels without an issue as Jason noted.
https://ls1tech.com/forums/wheels-ti...eet-lites.html
Last edited by LS1 SPEED; 02-16-2009 at 08:46 PM.
02-17-2009, 10:22 PM
#152
Banned
Thread Starter
iTrader: (10)
Join Date: Jan 2008
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
Some info.
5.5" Bs regular street lite Will work With Lt1 brakes and a narrowed rearend.
So if you are looking to narrow Your rearend ( which i do sell moser ready to go ) Or you have a narrowed rearend already. You can swap to Lt1 brakes in the rear and Bolt right on and go.
5.5" Bs regular street lite Will work With Lt1 brakes and a narrowed rearend.
So if you are looking to narrow Your rearend ( which i do sell moser ready to go ) Or you have a narrowed rearend already. You can swap to Lt1 brakes in the rear and Bolt right on and go.
03-06-2009, 04:09 PM
#159
TECH Enthusiast
iTrader: (1)
Join Date: Dec 2006
Location: Shelbyville, IN
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
What's the exact backspacing for the 17x11?