Anyone interested in Deep Dish Firehawk or WS6 factory rims?
#104
11 Second Club
iTrader: (22)
Join Date: Nov 2001
Location: Celina Texas
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
$2500 for these repops not all of the,, hell i'd be happy with something the likes of "OE concepts"
They repop alot of different wheels (like the oe vette wheels and ZR1's)
very cheap. they also do the 17x11 with the correct offset for our cars.
They repop alot of different wheels (like the oe vette wheels and ZR1's)
very cheap. they also do the 17x11 with the correct offset for our cars.
#106
11 Second Club
iTrader: (22)
Join Date: Nov 2001
Location: Celina Texas
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
Good luck with the wheels, hope they go over well. there just is a need for the cheap cast ones.
#108
I understand it is a stronger lighter wheel. but at the same time why pay 2500 for a set of OE lookalike wheels. when you could get something like CCW's for about $500 more
Good luck with the wheels, hope they go over well. there just is a need for the cheap cast ones.
Good luck with the wheels, hope they go over well. there just is a need for the cheap cast ones.
#109
Staging Lane
iTrader: (4)
Join Date: May 2007
Location: Maryland
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
You may want to advertise on the Corvette site, I don't think people running these cars are interested in spending that kind of money on wheels. I am sure they will be nice and strong, however these cars are usually driven daily. If a pot hole is hit I couldn't imagine trying to get a replacement. I think the first post stated an "affordable wheel", this isn't in the ball park of affordable for me. Sorry, good luck with your wheels.
#112
TECH Fanatic
iTrader: (2)
Do we even have a cad design yet?
Weight?
Polished or Chrome?
If polished, is the whole wheel polished, And I mean everything from the front lip to the rear lip?
I just have a hard time believing they are better especially when thrown out there with no evidence or even reasoning.
And if your sole reason is they are cheaper, well thats not a very good one.
That just makes them a cheaper alternative, not better.
#113
Your reasoning for this?
Do we even have a cad design yet?
Weight?
Polished or Chrome?
If polished, is the whole wheel polished, And I mean everything from the front lip to the rear lip?
I just have a hard time believing they are better especially when thrown out there with no evidence or even reasoning.
And if your sole reason is they are cheaper, well thats not a very good one.
That just makes them a cheaper alternative, not better.
Do we even have a cad design yet?
Weight?
Polished or Chrome?
If polished, is the whole wheel polished, And I mean everything from the front lip to the rear lip?
I just have a hard time believing they are better especially when thrown out there with no evidence or even reasoning.
And if your sole reason is they are cheaper, well thats not a very good one.
That just makes them a cheaper alternative, not better.
The reason is simple. These are 1 piece monoblocks. not a 2 or 3 piece wheel. 1 piece forged wheels are lighter and stronger than a 2 or 3 piece.
You can get them in either polished or Chrome. Polished is much harder to upkeep though....
If everyone who wants them would come up with no more than 3 designs we can get this going and get a cad for you.
We will not get a cad until we have confirmation of orders because it is not cheap to make a cad.....
Thanks
#114
The reason is simple. These are 1 piece monoblocks. not a 2 or 3 piece wheel. 1 piece forged wheels are lighter and stronger than a 2 or 3 piece.
You can get them in either polished or Chrome. Polished is much harder to upkeep though....
If everyone who wants them would come up with no more than 3 designs we can get this going and get a cad for you.
We will not get a cad until we have confirmation of orders because it is not cheap to make a cad.....
Thanks
You can get them in either polished or Chrome. Polished is much harder to upkeep though....
If everyone who wants them would come up with no more than 3 designs we can get this going and get a cad for you.
We will not get a cad until we have confirmation of orders because it is not cheap to make a cad.....
Thanks
If you are starting from scratch and designing a wheel for fbodies, at that price range go for a better look. Something along the lines of what CCW 505a or HRE 545's or Fikse FM10/FM5's at a $500-$1000 cheaper price would generate a lot of business. It'd also really help build your brand name in the fbody world to along the lines of HRE/Fikse/CCW/iForged. I've been looking for forged wheels that are cheaper than CCW's for quite a while.
Lighter OE wheels with a lip for +$2000 more isn't going to sell enough IMO.
#115
TECH Fanatic
iTrader: (2)
The reason is simple. These are 1 piece monoblocks. not a 2 or 3 piece wheel. 1 piece forged wheels are lighter and stronger than a 2 or 3 piece.
You can get them in either polished or Chrome. Polished is much harder to upkeep though....
If everyone who wants them would come up with no more than 3 designs we can get this going and get a cad for you.
We will not get a cad until we have confirmation of orders because it is not cheap to make a cad.....
Thanks
You can get them in either polished or Chrome. Polished is much harder to upkeep though....
If everyone who wants them would come up with no more than 3 designs we can get this going and get a cad for you.
We will not get a cad until we have confirmation of orders because it is not cheap to make a cad.....
Thanks
So when it gets bent all I need is a new barrel or a new face or whatever
#116
TECH Fanatic
iTrader: (9)
Join Date: Jan 2006
Location: Savannah, GA
Posts: 1,562
Likes: 0
Received 0 Likes
on
0 Posts
sorry but you can get a set of ccw's which is a one piece the (sp500) for $2600 for the set y would i want to buy knock offs for $100 cheaper.
thats the price they have on there site im sure i could get them cheaper from a distributer. im not trying to knock you, just trying to give people info and keep the options open. this is what a forum is for after all.
thats the price they have on there site im sure i could get them cheaper from a distributer. im not trying to knock you, just trying to give people info and keep the options open. this is what a forum is for after all.
#118
I think you're satisfying a need that isn't there. It originally started as CHEAP OE replacements with a lip. You're offering QUALITY OE replacements with a lip.
If you are starting from scratch and designing a wheel for fbodies, at that price range go for a better look. Something along the lines of what CCW 505a or HRE 545's or Fikse FM10/FM5's at a $500-$1000 cheaper price would generate a lot of business. It'd also really help build your brand name in the fbody world to along the lines of HRE/Fikse/CCW/iForged. I've been looking for forged wheels that are cheaper than CCW's for quite a while.
Lighter OE wheels with a lip for +$2000 more isn't going to sell enough IMO.
If you are starting from scratch and designing a wheel for fbodies, at that price range go for a better look. Something along the lines of what CCW 505a or HRE 545's or Fikse FM10/FM5's at a $500-$1000 cheaper price would generate a lot of business. It'd also really help build your brand name in the fbody world to along the lines of HRE/Fikse/CCW/iForged. I've been looking for forged wheels that are cheaper than CCW's for quite a while.
Lighter OE wheels with a lip for +$2000 more isn't going to sell enough IMO.
Tell us exactly what your looking for so we can help you out.
p.s. Please don't compare ICONZ with iForged. Compare ICONZ to HRE...