ndfrsd6

iTrader: (5)

sweet ! i also like the white letters

98RedBird

iTrader: (77)

Jesus man, you went to town on your inner fender wells... looks good though (with the tires on... lol)

BTW good choice rockin the white lettering. I like that look. I had the hoosiers on my T/A and I had the white lettering out too. Looks great.

C Murda

iTrader: (24)

looks sick!! are your wheels 11" wide or 12"...?

98mysticZ

iTrader: (11)

11's....

Big Bird WS6

iTrader: (9)

so since you got that in there can you tell me is there anyway to get the new mickey 345 35 18 in there?

Purple95Z28

iTrader: (6)

Looks great. I like the white letters too, it really shows you mean business I'm picking up a set for my car this weekend. I haven't seen any LT1s yet with 335s so it will be interesting to see if I can get them to fit or not.

Randy WS6

iTrader: (69)

I installed them on my TA and they are some big (MeatHookers)

99345hp

I dont like the white letters either. Other than that, it looks pretty good.

pyronotic138

iTrader: (1)

currently running the kuhmo ecsta V710 335.35.17 and have problems with traction and just the other day i sheared the lug nuts off. and yes they were just torqued. ruining one of my tires. soo ordered some of the 335.35.17 hoosier setups. hopefully they hook better so it will give a reason to put larger studs. check out the vid and picture. car is still a work in progress

here are some vids of my car setup and running it. and then the catastophy

http://s4.photobucket.com/albums/y13...=moto_0065.flv

http://s4.photobucket.com/albums/y13...=moto_0038.flv

Sluggish

iTrader: (10)

A 335mm wide slick lets them know you mean business

NHRAMAN

iTrader: (1)

NICE..letters look good...

MIGHTYMOUSE

iTrader: (59)

correct me if i'm wrong but i believe they are white letters on one side and black wall on the other so you have a choice when mounting??

also these are officially NOT DOT street legal correct? but they will pass as a DRAG RADIAL in competions.??

pyronotic138

iTrader: (1)

no. they are DOT approved but not recommended for daily driver and not intended for cornering. thats what the salesman told me. he said for a straight shot they definately the way to go

Randy WS6

iTrader: (69)

I have the same tires on my car and black walled them, so yes, white letters on one side and black letters on the other

LS1nut377

iTrader: (16)

nice looks good. you shouldnt have any hooking problems

pyronotic138

iTrader: (1)

hope i dont have problems with traction. the other concern is the salesman said no street cornering. what center section would you all recommend for a moser 9 inch rearend for street driving and high horsepower. and longivity of tires on cornering. i know the full spool i have isnt going to cut it

TX RED

iTrader: (19)

Been runnig these tires for coulpe months now. These tires hook been running 1.59 stock supension yet to try the nitrous . As for the street they spin for about a 2feet or so with no burnout. They like to atract cops LOL as I have been pull over 3 times. I just keep telling them there DOT

pyronotic138

iTrader: (1)

what is the best rearend setup on a 9 inch to use. trac-lock, truetrack, locker, or the auborn. in a power level please let me know

Sicko

iTrader: (1)

That's a serious rear end you got there. What are your suspension mods?

Braunbeck

iTrader: (4)

Shoot here I am concerned about getting some 315's, I just don't want to roll or hammer anything. I want to set it and forget it.