Pics of my deep dish z06's
04-12-2009, 04:16 PM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: Cleveland/Toledo OH
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Pics of my deep dish z06's Finally got my wheels on
Heres a few shots I snapped real quick today. I still need to buy new rear tires, I have 275's on there and their a bit stretched. The rims are deep dish c6 z06. Fronts are 17x9.5, rears are 18x10.5. I had to use the BFH and spacers to get them to fit. I will have to cut my bumpstops off to get the 285 or 295 tires on when I get them.
My buddy with the d40 will get some better shots for me in the next few weeks but these hold me over for now.
Heres a few shots I snapped real quick today. I still need to buy new rear tires, I have 275's on there and their a bit stretched. The rims are deep dish c6 z06. Fronts are 17x9.5, rears are 18x10.5. I had to use the BFH and spacers to get them to fit. I will have to cut my bumpstops off to get the 285 or 295 tires on when I get them.
My buddy with the d40 will get some better shots for me in the next few weeks but these hold me over for now.
04-12-2009, 08:39 PM
#5
On The Tree
Join Date: May 2008
Location: Mass
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Looks sweet! I put mine on last week but have yet to get quality pics up but I love them. I gotta get some spacers as well just so they will sit out at the edge of the wheel well cuz they are way too close to the bump stop and fender well.
Trending Topics
04-13-2009, 08:44 PM
#11
On The Tree
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: Cleveland/Toledo OH
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Got them from OE wheels on ebay for $585 shipped, though it looks like they change the prices every once in a while.
I have 5/16" spacers on, and yes, only in the rear. Even if the bumpstop wasn't an issue, I'd still run them just because it brings the wheels out flush with the quarterpanel better.
I'll have some new pics up hopefully by the end of the week with new rear rubber. I'm looking to get 295's so I can lose the stretch.
I have 5/16" spacers on, and yes, only in the rear. Even if the bumpstop wasn't an issue, I'd still run them just because it brings the wheels out flush with the quarterpanel better.
I'll have some new pics up hopefully by the end of the week with new rear rubber. I'm looking to get 295's so I can lose the stretch.
04-13-2009, 08:45 PM
#12
Staging Lane
Join Date: Apr 2004
Location: NJ
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
04-15-2009, 04:46 AM
#17
On The Tree
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: Cleveland/Toledo OH
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
thanks, Im lowered with eibach prokit springs, and run kyb agx shocks. i also did the heater hose mod to the rear drivers side because i had the common unlevel car problems. it helped level it out quite a bit. I would still like to be a bit lower in the front though.
04-15-2009, 07:38 PM
#18
looks great man! i just ordered the black version of these but in 18/19" setup and they will be here tuesday! cant wait to get these on i also have 5/16" spacers going on and hopefully the 19X10's will be good with just some BFH. I already grinded my bumpstops down to almost nothing...only thing i am worried about is being so low on these DMS springs...i put the tires up to my wheel wells and i have absolutely NO wheel gap so we will see..im running 285/35/19's and 255/40/18's in Wide-Oval RFT's
