mastercoryd

iTrader: (3)

i know alot of people i talk to think this is dumb, but i know of some people who have done it and seems to work really good for track use, except for witner my cars a dd and i want to take it to occasional track events (road courses not 1/4 mile) and i love the look of 17x11's front and rear with the zr1 wheels anyone have pics? i want to c how much it sticks out in the front... and if this is to agressive for daily driving i was thinking about 18x10.5 z06 wheels front and rear so does anyone have pics of that? im looking for pics on an f body camaro thanks alot

OEWheelsLance

iTrader: (4)

We don't have any images, but we have sold a few sets like this. Of course we can't guarantee the fitment in the front. Not sure what mods were made to get them to work.

hitmanws6

iTrader: (20)

there is a thread on here about someone who did it. it looks amazing

Loud02ss

iTrader: (3)

here's a couple. i think i found them on here a while ago. looks badass.

SUTTERERMAN85

iTrader: (42)

i did/do it sometimes. i have been on 4 18x10.5's z06s for a while now though. here are some pics of the 11 zr1's on all 4 corners. 335's on back and 285's up front. i didnt have anymore 335 or 315's but they fit in the front too. when turned to the stop on the front they rub just a little on the inner fender.

vatechguy3

iTrader: (4)

what is the offset on the wheels you are using?

also, are you using any spacers?

thanks
tony

MurderedOut

iTrader: (21)

i have 18x10.5s all the way around, 56mm offset (deep dish vette) with 315/30/18s on back (1/2" spacer) and 295/30/18s on front (1/4") spacer. I also ran 2.5" arp studs

SUTTERERMAN85

iTrader: (42)

50mm ZR1's with 1/4 spacer on the front. 18x10.5's without

mastercoryd

iTrader: (3)

any pics of the 18x10.5's front and rear?

SUTTERERMAN85

iTrader: (42)

might go take some in a little while. car is really dirty though. we will see.

gun4hire

iTrader: (17)

hyundaiboy is running 18x10.5's on all 4 corners:

https://ls1tech.com/forums/wheels-ti...deep-dish.html

1toofastlt1

iTrader: (4)

this looks so bad ***. are there any issues up front with rubbing?

colby72olds

iTrader: (7)

FWIW.... my 18x10.5's with 295/35 KDW2's fit fine on the front. The steering was more "heavy" obviously but it wasn't bad. Sorry no pics.

mastercoryd

iTrader: (3)

thanks for pics everyone, keep it coming if anyone has anymore!

robertbartsch

i have 315s x 4.

carlos64030

iTrader: (5)

All these pictures you posted are overwhelming... my eyes and laptop can't handle them all!!!

The Batman

iTrader: (4)

need moar!!!!!!!!!

litemup02

iTrader: (39)

One i had saved

sixvi6-camaro

iTrader: (9)

I test fit some 17x11's with 315's on my car. Dont' have the funds to make it happen at this time though. OE wheels DD with just a 1/4" spacer.





Only issue is the car is bit low for them.

Camaroking1996

I wonder how they would look on a third gen....