Got OE Wheels? We need your Images *DON'T QUOTE PICS!
#604
#607
Finally got some good pics with the new shoes ...... Thanks OEWheels
I love my wheels
http://i2.photobucket.com/albums/y10...1/DSC_0022.jpg
*NO NEED TO QUOTE PICS!
I love my wheels
http://i2.photobucket.com/albums/y10...1/DSC_0022.jpg
*NO NEED TO QUOTE PICS!
Last edited by CRAGER; 05-24-2010 at 01:54 AM.
#608
Thread Starter
LS1Tech Platinum Sponsor
iTrader: (4)
Joined: May 2009
Posts: 512
Likes: 1
From: Sarasota, FL
We only had 3 sets pre-ordered on the 18x9.5 machine face so we were not going to do that finish but talked the factory into doing a special 40 pc run. It's going to be 90+ days, so if you want one of these please call and get on the list. 16 pcs are spoken for right now.
#609
Damnit, ZL1LT1, you're making me not want to get rid of my DD C5's. lol. I'd like to keep them, because they look so good. But, if I sell them, I can get my motor done sooner. Plus, I wanted to switch things up a little. Like maybe, some chrome DD C6 Z06's (18x8.5" fronts, 18x10.5" rears no rivets). And the fact that they're doing the 40 pc run for the machined face 18x9.5's is really tempting too.
#611
woooo hoooo finally got my OE Wheels. Nothing bad OE Wheels did. my UPS driver decided to split up my delivery. Had to 2 pkgs delivered once, then another 2 delivered But I got them
And I also jsut ordered 285/40/17 Nittos all around
cannot wait to get them on, but it will be another month though still winter time here in chicago, plus the car is still in storage
And I also jsut ordered 285/40/17 Nittos all around
cannot wait to get them on, but it will be another month though still winter time here in chicago, plus the car is still in storage
#614
Thank you
Thank you
They are vinyl . I designed them myself so they hug the 4th gens curves .
Thank you
Thank you
[QUOTE=Giddswat;12999292] Thank you very much
I would keep them but im a bit biased
Theyre worth the wait for sure
Thank you
[QUOTE=Giddswat;12999292]
Finally got some good pics with the new shoes ...... Thanks OEWheels
I love my wheels
http://i2.photobucket.com/albums/y10...1/DSC_0022.jpg
*NO NEED TO QUOTE PICS!
That is one of the best looking F-body`s I have seen. The wheels look great!
I love my wheels
http://i2.photobucket.com/albums/y10...1/DSC_0022.jpg
*NO NEED TO QUOTE PICS!
That is one of the best looking F-body`s I have seen. The wheels look great!
Damnit, ZL1LT1, you're making me not want to get rid of my DD C5's. lol. I'd like to keep them, because they look so good. But, if I sell them, I can get my motor done sooner. Plus, I wanted to switch things up a little. Like maybe, some chrome DD C6 Z06's (18x8.5" fronts, 18x10.5" rears no rivets). And the fact that they're doing the 40 pc run for the machined face 18x9.5's is really tempting too.
Theyre worth the wait for sure
Last edited by CRAGER; 05-24-2010 at 01:54 AM.
#618
Looks Good!! thanks for the pics and your business
Thanks for detailing that out for everyone and thankyou for your business.
[QUOTE=ZL1LT1;12997758]Finally got some good pics with the new shoes ...... Thanks OEWheels
I love my wheels [/quote
Looks great. Thanks for posting, and thankyou for your business!
There is! they will be about 3 months + behind and there will only be a small limited set of them just for you guys. they will not go on ebay or our website.
Looks great! thanks for posting & thanks for your buisness
Sorry thats the only way they come
I first just want to start by saying I have been trolling the site for a month now gathering the information that i needed. So I thought it necessary to make this post to show off my rims and to try and detail everything I did for anyone who might need the information.
I have a 1997 Firehawk
Stock Wheel size was 17x9 with 50mm offset I believe.
Tire Size was 275/40/17
The tires I purchased were the OE Wheels
C6 ZO6 Deep Dish Rims
18x8.5 Front 46 mm offset I think......
19x10 Back 64 mm offset I think.....
The hard part was finding the proper tires for the rims. Now I'm a cheap Bastard so what I ended up getting was Nankang tires. With the different rims sizes I did not want to screw up my ABS.
So for the back I ended up getting 285/30/19. This equaled out to be the same diameter of the old tires so the speedo is almost dead on. Next was the front tire. I ended up getting a 255/35/18 which ended up being .8" less than the back which seems like an except-able range and the ABS is still happy.
Next up, the test fitting of the Rims. Fronts fit perfect, backs ehhhhhhh not so much. The backs needed a much longer stud, an inch to be exact. I ended up purchasing ARP studs from Jegs.
http://www.jegs.com/i/ARP/070/100-7708/10002/-1
Im kind of glad I had to pick up the ARP studs because I was using a 1/4 " spacer(ebay) for the back as well and these studs are much much stronger.
when you remove the old studs, in order to get the new ones in you have to remove brake caliper, rotor and and bracket behind hub that holds the break caliper. Because the new studs are so much longer they are much harder to squeeze by that bracket, you just have to find the right angle and bang it in.
So here are the pics of the car. They are not the greatest, just trying to get pic before dark. Maybe next weekend I will take some better ones.
Later
http://i128.photobucket.com/albums/p...U/100_0428.jpg
http://i128.photobucket.com/albums/p...U/100_0423.jpg
http://i128.photobucket.com/albums/p...U/100_0426.jpg
*NO NEED TO QUOTE PICS!
I have a 1997 Firehawk
Stock Wheel size was 17x9 with 50mm offset I believe.
Tire Size was 275/40/17
The tires I purchased were the OE Wheels
C6 ZO6 Deep Dish Rims
18x8.5 Front 46 mm offset I think......
19x10 Back 64 mm offset I think.....
The hard part was finding the proper tires for the rims. Now I'm a cheap Bastard so what I ended up getting was Nankang tires. With the different rims sizes I did not want to screw up my ABS.
So for the back I ended up getting 285/30/19. This equaled out to be the same diameter of the old tires so the speedo is almost dead on. Next was the front tire. I ended up getting a 255/35/18 which ended up being .8" less than the back which seems like an except-able range and the ABS is still happy.
Next up, the test fitting of the Rims. Fronts fit perfect, backs ehhhhhhh not so much. The backs needed a much longer stud, an inch to be exact. I ended up purchasing ARP studs from Jegs.
http://www.jegs.com/i/ARP/070/100-7708/10002/-1
Im kind of glad I had to pick up the ARP studs because I was using a 1/4 " spacer(ebay) for the back as well and these studs are much much stronger.
when you remove the old studs, in order to get the new ones in you have to remove brake caliper, rotor and and bracket behind hub that holds the break caliper. Because the new studs are so much longer they are much harder to squeeze by that bracket, you just have to find the right angle and bang it in.
So here are the pics of the car. They are not the greatest, just trying to get pic before dark. Maybe next weekend I will take some better ones.
Later
http://i128.photobucket.com/albums/p...U/100_0428.jpg
http://i128.photobucket.com/albums/p...U/100_0423.jpg
http://i128.photobucket.com/albums/p...U/100_0426.jpg
*NO NEED TO QUOTE PICS!
[QUOTE=ZL1LT1;12997758]Finally got some good pics with the new shoes ...... Thanks OEWheels
I love my wheels [/quote
Looks great. Thanks for posting, and thankyou for your business!
Looks great! thanks for posting & thanks for your buisness
Sorry thats the only way they come
__________________
Nelson W. OE Wheels
Customer Service Rep. & Sales
nelson@oewheels.net
Give us a call for fast service!
(866) 273 - 3651
Check out our wheels!
Nelson W. OE Wheels
Customer Service Rep. & Sales
nelson@oewheels.net
Give us a call for fast service!
(866) 273 - 3651
Check out our wheels!
#619
No rivets
18x9.5 18x10.5
__________________
Nelson W. OE Wheels
Customer Service Rep. & Sales
nelson@oewheels.net
Give us a call for fast service!
(866) 273 - 3651
Check out our wheels!
Nelson W. OE Wheels
Customer Service Rep. & Sales
nelson@oewheels.net
Give us a call for fast service!
(866) 273 - 3651
Check out our wheels!
#620
Got all my wheels on Fridaty Scott They look great. Just need to be cleaned up a bit. Ohh I am referring to my black c6 17x9.5s
And just yetserday I orderd (4) 285/40 Nitto NT555 Extremes for $500
Won't be able to get pics till I pull the car out of storage
And just yetserday I orderd (4) 285/40 Nitto NT555 Extremes for $500
Won't be able to get pics till I pull the car out of storage