Got OE Wheels? We need your Images *DON'T QUOTE PICS!
#1041
LS1Tech Platinum Sponsor
iTrader: (6)
Join Date: May 2009
Location: sarasota,fl
Posts: 1,333
Likes: 0
Received 0 Likes
on
0 Posts
^ I hear ya
__________________
Nelson W. OE Wheels
Customer Service Rep. & Sales
nelson@oewheels.net
Give us a call for fast service!
(866) 273 - 3651
Check out our wheels!
Nelson W. OE Wheels
Customer Service Rep. & Sales
nelson@oewheels.net
Give us a call for fast service!
(866) 273 - 3651
Check out our wheels!
#1042
11 Second Club
iTrader: (19)
C5 WHEELS 18x10.5" for fronts
The wheels comes in 17", 18" and 19". A longer spoke may create the appearance of being thinner.
These wheels are made to fit 93-02 without spacers if you run 17x9.5/18x10.5 set-up and use the mfgrs suggested tire sizes. If you run the 18x10.5 in the front you will need a spacer because 18x10.5s were intended to be used as rears only. If you run the 19" in the rear you will need a spacer.
These wheels are made to fit 93-02 without spacers if you run 17x9.5/18x10.5 set-up and use the mfgrs suggested tire sizes. If you run the 18x10.5 in the front you will need a spacer because 18x10.5s were intended to be used as rears only. If you run the 19" in the rear you will need a spacer.
#1043
TECH Apprentice
iTrader: (2)
Join Date: Jul 2010
Location: Oklahoma City, OK/North Long Beach/Paramount, CA
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
#1044
11 Second Club
iTrader: (19)
check here ---->https://ls1tech.com/forums/wheels-ti...-cornners.html
#1045
TECH Fanatic
iTrader: (1)
Join Date: Jan 2009
Location: P-Town, IN
Posts: 1,358
Likes: 0
Received 0 Likes
on
0 Posts
C5 DD machined face with black vents. 18x9.5/18x10.5 with 275/35-18 and 295/35-18 BFG KDW's.
Pictures taken with iPhone4. Better pictures will come once the weather is nice and the car is clean...
Pictures taken with iPhone4. Better pictures will come once the weather is nice and the car is clean...
Last edited by egott_91; 08-21-2010 at 11:19 AM.
#1046
11 Second Club
iTrader: (19)
How is it that you had these issue with the front rubbing and some don't? Where on the spindle did it rub?
Fit was great, for the wheels. But, I put giant 335's on the back, so it was a PITA to put them on. Had to run 5/16" spacers and hammer the inner fenders pretty good, and roll the outters. Then, I had to run a tiny spacer up front, to keep the 10.5's from rubbing the brake spindles. I actually ended up trading the wheels for some Ruff Racing 278's today. I just loved the way that the Ruffs looked on my car, and I had been wanting a set for a long time. Plus, they had brand new tires on all 4 corners, whereas my 335's were about done for, and I was dreading the $550 to replace them. I'll run the Ruffs for a little while, and end up getting another set of OEWheels rims again next year though. Most likely some polished/chrome deep dish C6 Z06's.
On a side note, the machined face DD C5's look amazing on my buddy's pewter 2000 SS on Eibach Sportlines though. I think they look way better on his car than they did on mine. I'll try and get some pics of it sometime soon to throw up on here. Took a lot less modifying to get the 335's to fit on his car than mine, and he's even lowered with stock LCA's and stock PHB. We just had to hammer the inner fender, no spacers and no rolling of the outter fender.
On a side note, the machined face DD C5's look amazing on my buddy's pewter 2000 SS on Eibach Sportlines though. I think they look way better on his car than they did on mine. I'll try and get some pics of it sometime soon to throw up on here. Took a lot less modifying to get the 335's to fit on his car than mine, and he's even lowered with stock LCA's and stock PHB. We just had to hammer the inner fender, no spacers and no rolling of the outter fender.
#1054
TECH Addict
iTrader: (11)
Sorry guys, I keep forgetting to get a good photo when they are on..these are actually temporary use on my Corvette until my other 2 sets of Forgestars come in..These are really for my 2002 Camaro SS
Sorry guys, I keep forgetting to get a good photo when they are on..these are actually temporary use on my Corvette until my other 2 sets of Forgestars come in..These are really for my 2002 Camaro SS
4- 18x10.5
Sorry guys, I keep forgetting to get a good photo when they are on..these are actually temporary use on my Corvette until my other 2 sets of Forgestars come in..These are really for my 2002 Camaro SS
4- 18x10.5
#1055
LS1Tech Platinum Sponsor
iTrader: (6)
Join Date: May 2009
Location: sarasota,fl
Posts: 1,333
Likes: 0
Received 0 Likes
on
0 Posts
Black w/machined lip 18x9.5 f & 18x10.5 r
http://i129.photobucket.com/albums/p...wheelscopy.jpg
http://i129.photobucket.com/albums/p...wheelscopy.jpg
Your car looks great : but we dont carry that wheel in an 18x9.5 thats ok though :
Looks good : thanks for posting and thanks for your business
__________________
Nelson W. OE Wheels
Customer Service Rep. & Sales
nelson@oewheels.net
Give us a call for fast service!
(866) 273 - 3651
Check out our wheels!
Nelson W. OE Wheels
Customer Service Rep. & Sales
nelson@oewheels.net
Give us a call for fast service!
(866) 273 - 3651
Check out our wheels!
#1057
LS1Tech Platinum Sponsor
iTrader: (6)
Join Date: May 2009
Location: sarasota,fl
Posts: 1,333
Likes: 0
Received 0 Likes
on
0 Posts
sorry, what was the original question?
__________________
Nelson W. OE Wheels
Customer Service Rep. & Sales
nelson@oewheels.net
Give us a call for fast service!
(866) 273 - 3651
Check out our wheels!
Nelson W. OE Wheels
Customer Service Rep. & Sales
nelson@oewheels.net
Give us a call for fast service!
(866) 273 - 3651
Check out our wheels!
#1059
LS1Tech Platinum Sponsor
iTrader: (6)
Join Date: May 2009
Location: sarasota,fl
Posts: 1,333
Likes: 0
Received 0 Likes
on
0 Posts
from our understanding a lot of that has to do with each individual car. Its like you said some fit and some do not, and that is because of certain cars being lowered and other mods done to them. we do not guarantee fitment on the front with the 10.5's but a lot of people are putting them on. I know this answer is kinda vague but we have not recieved a real good answer either.
__________________
Nelson W. OE Wheels
Customer Service Rep. & Sales
nelson@oewheels.net
Give us a call for fast service!
(866) 273 - 3651
Check out our wheels!
Nelson W. OE Wheels
Customer Service Rep. & Sales
nelson@oewheels.net
Give us a call for fast service!
(866) 273 - 3651
Check out our wheels!
#1060
TECH Enthusiast
iTrader: (20)
First off i want to thank OE Wheels for putting my car on their site showing off the black/polished C5DD!!! i dont know how long its been up there, i just noticed it today
To answer your question now. I have now installed 4 sets of the DD 10.5's front and rear on Fbody's. And have worked on plenty other's with them already on there
No matter how much you are lowered or how much your car is a 4X4 they wheel does not hit the spindle BUT it is ridiculously close. i would say around .025" yes .025...... SO when you are taking hard turns or anything and your wheel bearing flexes a little bit, IT will hit and it did even on my car. I have installed 3/16" spacers on most of these cars and my car has a 1/4" spacer to put them COMPLETELY flush with the fender. you can use stock studs but you need to get some extended shank acorn lugs and they fit perfect.
No matter what other people say if they clear, they obviously just think that because they dont hit but are close they are ok. but they will rub.
Just to clarify, if you want to run 315's on the back 10.5's you are most likely going to want to use a spacer anyways because you have to beat the inner fender a pretty good amount anyways. i run a 3/16" spacer on the rear and they still catch when the car is in the air. Some smaller 315's as in Nitto's and Michelin's might be better but my Hankook RS2's run bigger and they wouldnt of even cleared unless i put the car on the ground with a jack to get past the bumpstop without the spacer's. let me know if you have any more questions on what tire's you are using...i have installed all kinds of brands and sizes.