Wheels are deep dish C6 Z06 gunmetal with polished lip
18x10.5 rears with 315/30/18 Hoosiers
17x9.5 fronts with 275/35/17 Kumho's
no spacers
And didnt have to do BFH.
The rears only rubbed in one place and it took like three hits with a hammer and no more rubbing

 

Friendly FYI to lowered car owners that will be running any tires 305 size or bigger you will need spacers, bfh mod, and longer studs/or extended lugs. My car is lowered 1.75 inches and needed to grind bump stop bang inner fender, roll outer fender, run a 5mm spacer and run longer extended thread lugs to fit 315 tires. But all inexpensive and well worth it to fit fatty tires.

 

i run 315's and didnt have to do anything beside bang one spot on the inner fender. guess it depends on the offset of your wheels.

 

is you ca lowered? again my car is lowered 1.75"? If mine was stock height i would have cleared.

 

Excellent Photo. Those look really good.

Those look perfect on your vehicle. Thanks for posting these.

Sorry, we only have the Zr1 in 17x11 at the moment. Not sure what we will do in the future.

 

Here's my setup:
Front: 17x9.5's with 275/40 BFG G-Force Sports
Rear: 18x10.5's with 295/25 Bridgestone Potenza RE760's (sweet tire btw)
Rear has a 3/8" Baer Spacer, rolled the fenders and ground down a little bit of the bump stops just to be safe.

 

Stock sizes: 17x9.5 and 18x10.5

 

ZR1
17x9.5
17x11

 

Did bump stop removal and some cutting to fit the rears. I have some horrible fitting tires though (undersized). 275 on a 10.5 and 255 on a 9.5.

 

^^ fix your license plate lol

 

Thanks again for posting images. Please keep them coming.

 

I Bought the silver Zr1's last night, 17x9.5 & 11.. I was worried about how it was goin look on the rear, Ive had 17x11 zr1 on rear before and you could almost put a coke can on tire OUTSIDE of body, but offset was different from these...
Look like the LS1 car tucks the rear a little better than the LT1 car(I have LT1 car)
CANT WAIT TO GET THEM!!

 

You shouldn't have any problems with fitment. If anything, one side will stick out farther than the other side and to fix that you just need to get an Adjustable Panhard Bar. My rear wheels sit even with both quarter panels.

 

Son's car 99 SS clone with 17x9.5

 

Do you guys still have these rims in stock? I would like two 17x9.0 or 17x9.5 for the rears if you do. These are 17x8.5.

 

We have just a few pieces left in 17x8.5 or 18x9.5. Those are the only sizes we carry in that wheel. As seen above, we do have deep dish options available.

 

2nd Millennium Formula
Front: 17 x 9.5 C6 Deep Dish - 275/40ZR/17
Rear Wheels: 18 x 10.5 C6 Deep Dish - 305/35ZR/18 (0.22 spacer)

 

\

Polished Deep Dish Y2k 18x10.5

 

oewheels in kuwait,





old wheels.....



new wheels on.....

 

^^^ looks good. haha yall just changed the wheels right there? lol