people with 325/50/15's and lowering springs got pics?
#22
9 Second Club
iTrader: (1)
Join Date: Oct 2005
Location: Lexington,S.C.
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Heres a couple of my WS6. Coil overs up front dropped about two inches, rear is stock with 1/2 coil cut and isolators removed. Rear is narrowed a total of 4.5"(2.25 per side), wheels are 10.25 with a 5.5BS so the tire actually sits in the stock location.
#24
10 Second Club
iTrader: (4)
Join Date: Mar 2006
Location: Fort Wayne, IN
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
The Bogart GT's look sweet. I plan on ordering some bolted GT's to go with the narrowed rear from Midwest. Narrowed 3" per side and a 5 inch backspace. Should look pretty sweet. Just have to wait for the tax refund...
#25
TECH Apprentice
Join Date: Nov 2008
Location: Illinois
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
It's been less than 12 hrs, be patient.
It's not exactly what you're looking for, but I run those tires with stock rear springs and no spring isolators (~3/4" drop). For me it took lots of BFH work, rolling the outer fender lips, adj panhard, adj LCA's to get them to fit. I had pro-kit springs on there originally but it was way too low and rubbed the outer fenders bad. Hope that helps.
It's not exactly what you're looking for, but I run those tires with stock rear springs and no spring isolators (~3/4" drop). For me it took lots of BFH work, rolling the outer fender lips, adj panhard, adj LCA's to get them to fit. I had pro-kit springs on there originally but it was way too low and rubbed the outer fenders bad. Hope that helps.
#26
Car looks awesome Philip as always! I'm still trying to get my 325's to fit! I better hurry and finish mine for pinks!
#34
12 Second Club
iTrader: (17)
Join Date: Dec 2004
Location: Cooper City, FL
Posts: 1,449
Likes: 0
Received 0 Likes
on
0 Posts
edit: btw my car should be sitting identical to NOSJNKY's I got measurements/questions from him I have a stock length 9" rear however. qa1's up front 1 full coil cut springs in back 9" raises the rear vs the stock narrowed 10 bolt.
Chad
#36
Teching In
iTrader: (1)
Join Date: Dec 2008
Location: Houston, Texas
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
It's been less than 12 hrs, be patient.
It's not exactly what you're looking for, but I run those tires with stock rear springs and no spring isolators (~3/4" drop). For me it took lots of BFH work, rolling the outer fender lips, adj panhard, adj LCA's to get them to fit. I had pro-kit springs on there originally but it was way too low and rubbed the outer fenders bad. Hope that helps.
It's not exactly what you're looking for, but I run those tires with stock rear springs and no spring isolators (~3/4" drop). For me it took lots of BFH work, rolling the outer fender lips, adj panhard, adj LCA's to get them to fit. I had pro-kit springs on there originally but it was way too low and rubbed the outer fenders bad. Hope that helps.