New wheels - Gunmetal ZR1's!
#1
TECH Enthusiast
Thread Starter
iTrader: (5)
Join Date: Jun 2009
Location: McKinney, Tx
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
New wheels - Gunmetal ZR1's!
Picked up a set of wheels and new tires last weekend.
Here are a few pictures, the car is dirty, this is after a 8 hour round trip to Houston.
Let me know what you think =)
17x9 with a 275/40/17 tire
17x11 with a 315/40/17 tire
Stock ride height
Rears have spacers, gotta BFH a bit and maybe I'll be able to take them off, they stick out just a bit much for me.
Lowering is coming next!
Here are a few pictures, the car is dirty, this is after a 8 hour round trip to Houston.
Let me know what you think =)
17x9 with a 275/40/17 tire
17x11 with a 315/40/17 tire
Stock ride height
Rears have spacers, gotta BFH a bit and maybe I'll be able to take them off, they stick out just a bit much for me.
Lowering is coming next!
Trending Topics
#11
Staging Lane
Tite wheels. Im looking a the chrome ones myself. I had some 17/18 dd c5 black with machined lip. I didnt like the dullness so I sold them. Any ideal on the weight differ between the 18x10.5 and the 17x11 anyone?
#14
TECH Enthusiast
Thread Starter
iTrader: (5)
Join Date: Jun 2009
Location: McKinney, Tx
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
Hahahahaa, ouch man =P
I will probably pick up some lower mile springs/shocks and go from there.
I think I will be happy with just the hose mod in the rear, but the front needs to come down too. Is there anything I can do there without cutting a coil or going to a lowering spring?
That way I can find the ride height I want/need for DDing and then spend some real money on the right setup.
I will probably pick up some lower mile springs/shocks and go from there.
I think I will be happy with just the hose mod in the rear, but the front needs to come down too. Is there anything I can do there without cutting a coil or going to a lowering spring?
That way I can find the ride height I want/need for DDing and then spend some real money on the right setup.
Last edited by happysem; 07-01-2010 at 02:22 AM.