Brazing curb rash C5 Z06 Speedline SL1731 GM p/n 9594808
07-17-2010, 07:43 PM
#1
Teching In
Thread Starter
Join Date: Jul 2007
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Brazing curb rash C5 Z06 Speedline SL1731 GM p/n 9594808 Anybody know what the detailed spec is for the composition of the alloy used in this wheel so that the proper brazing rods can be identified and used to fill in the pockets on the lip caused by curbing the car. Paint will be removed, pockets brazed and then lip refinished.
The Speedline website http://www.speedlinecorse.co.uk/technology.htm states that "The majority of Speedline’s wheel production utilises low pressure, multi-injection casting technology, with primary ALSi7 alloys." Which one for the C5 Z06?
I don't want to use Bondo. The roads here are terrible. The bondo will come off sooner or later.
The Speedline website http://www.speedlinecorse.co.uk/technology.htm states that "The majority of Speedline’s wheel production utilises low pressure, multi-injection casting technology, with primary ALSi7 alloys." Which one for the C5 Z06?
I don't want to use Bondo. The roads here are terrible. The bondo will come off sooner or later.
