SHovV

iTrader: (1)

Nice find man

NBM99SS

iTrader: (33)

I grabbed one of those lol. I don't remember which it was. It even had some problems doing work. My buddy used a wire brush on a drill on his which also worked fine.

my bandit

iTrader: (10)

well i just got done doing a slight cleaning and its going to be alot of work! i need to take them completely apart and clean it reallllly good. but heres some more pictures
Before:



After:





What They Will Look Like on the Car:



The Dirt From One Wheel:

my bandit

iTrader: (10)

one last question...
What goes in the threaded holes? spacers?

desertLS1

iTrader: (8)

Bad ***!! Going to look like 'trusts' old WS6 before he had his coated black.

smok'nZ

iTrader: (160)

is your TA a 4x4? jk good deal on the wheels

Nacho SS

iTrader: (4)

Great find. How wide are the rears?

my bandit

iTrader: (10)

the rears are only 8" but im going to change out the lip to 3" and make it a 10" rear

Steve68

iTrader: (23)

Those are nice, Simple Green and a maroon fine 3M/scotchbrite is what I use,

I think Thatchers the one, I'll check!

NXPRSS

iTrader: (23)

Nice Deal!

matts02ws6

Some guys have all the luck!! haha

Beaflag VonRathburg

iTrader: (176)

Congrats on getting a good deal. Some of my friends don't believe some of the deals I've found, but they're out there. You just have to be the one lucky enough to find them.

my bandit

iTrader: (10)

That day was all luck. When we got there we were directed into the very first row instead of having to walk 1/4 mile to the entrance. Then as we were walking up a guy gave us a ticket for 2 to get in all 4 days for 20 bucks (one ticket is 15) to get in. So me and my dad saved 10 bucks. Then I found these

my bandit

iTrader: (10)

I just noticed I should have played the lottery that day...

Steve68

iTrader: (23)

Thatchers the one, and Fikse back open in Canada, I here there looking for work, Kodiak motor sports aquired them,

Steve68

iTrader: (23)

I post a pic of my rear in the Conversion/hybrid forum, under Steve68 Camaro, check them out, took me 5 monthes to get them, right near when they were going under,

my bandit

iTrader: (10)

holy ****. well after finals ive had a chance to start cleaning them more. i just tried on the inside with a dremel and metal polish and its barely making a dent... brake cleaner didnt do much either

z28badass

iTrader: (1)

should look good on my buddy has the same ones on his t/a

my bandit

iTrader: (10)

I think these are pretty old due to the fact that the centercaps say fikse forged instead of just fikse like the newer ones do

ZYA_LTR

Try spray on oven cleaner on the barrels, let it soak for 10 minutes. Works wonders on stainless exhaust. might wanna try a small area and see if you need to tape off the faces of the wheels, unless your gonna poiwdercoat them.