BMW rims on camaro
02-09-2011, 10:11 PM
#2
Bolt pattern is slightly off with the BMW wheels compared to the F-body, but is very close. They should fit fine, the wheel will have a slight tuck since they are only 8" wide. Should look similar to how oem corvette wheels bolt up to these cars.
02-10-2011, 12:02 AM
#3
TECH Junkie
Join Date: Oct 2009
Location: Rutherford, North Carolina
Posts: 3,552
Likes: 0
Received 1 Like
on
1 Post
If I were to do it, I'd have them widened and use spacers to bring the wheels out a little bit. I think it would look a lot better than getting them and slapping them on.
04-14-2011, 10:10 AM
#5
Formally Simplɘ Jack
Glad I seen this, I'm trying to sell my 19's on craigslist to this dude that has a 2000 BMW528i, my bolt pattern is 5/120.65 and his is 5/120, so they should fit his BMW with no problem or modifications?
04-14-2011, 01:02 PM
#6
TECH Fanatic
iTrader: (5)
Join Date: May 2007
Location: Tyler, Tx
Posts: 1,377
Likes: 0
Received 0 Likes
on
0 Posts
I bolted my ZR1 wheels on my 540i once... they fit. Also swapped a wheel from the 540i over to the Camaro... It was an M5 wheel so I'm not too sure about the offsets on it compared to that.
Trending Topics
04-17-2011, 01:49 AM
#9
TECH Regular
Join Date: May 2009
Location: Honolulu, HI
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
They WILL fit. My old SSR comps were off of a BMW 3 series 18x9.5 35mm offset on the rear 18x9.5 40mm offset on the fronts. had them on for over a year daily driving, SCCA, drag racing, street racing with no problems.
