Guys with ZO6 wheels, post pics please!
#46
#48
yeah man! youll like em.
what i did for the rear is took out the outside layer of the 'hump' for the spring. im going to trim it a little more, and possibly split the inner side and push it in and weld it together.
and...bfh on the front. they can fit...
what i did for the rear is took out the outside layer of the 'hump' for the spring. im going to trim it a little more, and possibly split the inner side and push it in and weld it together.
and...bfh on the front. they can fit...
#49
brennan---what size tires you running too? and those b&g springs i seen drop 1.4 inches...looks lower than that. you got the heater hose mod? i like how that sits.
also got any more pics of it? and possibly the bfh mod you did?
also got any more pics of it? and possibly the bfh mod you did?
#53
I had to remove the hump too. I also need to weld that together. Front 295/35-18(my old rears from my 17/18 combo) ,rears 325/30-19. I'm running on b&g;(1.6). Also I cut 1 coil off the front, no heater hose mod. My front tires are to big, I need 285/30-18 to get the same profile and sidewall height. Sorry for rambling!
Brennen
Brennen
#57
I had to remove the hump too. I also need to weld that together. Front 295/35-18(my old rears from my 17/18 combo) ,rears 325/30-19. I'm running on b&g;(1.6). Also I cut 1 coil off the front, no heater hose mod. My front tires are to big, I need 285/30-18 to get the same profile and sidewall height. Sorry for rambling!
Brennen
Brennen
im at stock ride hight now. but will probably be going with stranos soon.
and i need to find some 325/30s.
also, the last camaro posted with oem wheels is bad *** as well!