bbreeze93

i just picked up 2001 camaro ss wheels (17x9) for my 1993 z28. I couldn't find a thread on here with these rims. i could only find ones with ZR1 (17x9.5) but then again i am a noob to this site. I did find something one time about the 1993 hub being just a hair big, like .03 inches to be exact if im not mistaken. they suggested grinding the inside of the rim down with a dremel. Is any of this true? thanks in advance

bigj2717

iTrader: (15)

Yeah are a little smaller then the hub. http://shbox.com/1/4th_gen_tech2.html#wheel_mod Here is a write up of what you need to do

jarretthise

iTrader: (9)

Instead of grinding o your rim and affecting the structure, I would change out the hub and spindle set up. Aluminum rims needs all the structural secureness they can get. Just my .02

Z28/2002

iTrader: (27)

trimming the inner hub section isn't going to hurt the integrity of the wheel

9WhiteCamaro9

^ 2x on what he said.

oChristiano

iTrader: (6)

I didn't have to do anything to put my SS 10 spokes on my 96 z28..

Z28/2002

iTrader: (27)

FWIW

I had to trim my CETA wheels when I put them on my 94 Z28

94lt1white_bird

iTrader: (3)

The amount you have to grind off won't do **** in the long run go ahead and grind them down a hair that's all it takes I have done it multiple times