buellxb12s

iTrader: (9)

My Wifes 3 series has m5 replicas on it and I've often thought about bolting then on I just to check them out or put my ruffs on her car to see how that would look

silverWS.6

iTrader: (1)

Why?! Why have you not done this?!

Stuinkuwait

iTrader: (3)

I would love to see that. 5 series wheels are great looking sets.

buellxb12s

iTrader: (9)

I may bolt them on then one day. I took them off her car tonight for her to run the stockers in this weather. I set it up beside it just as a teaser. I will clean the wheels tomorrow.

Here is her car with them and mine with the ruffs so technically related to the thread.

Coyotesa

iTrader: (1)

Here is mine with some 19x8.5 front and 19x9.5 rear. Axis Shines.





-Buddy-

Flubyux2

How much offset can you get before the tires hit the fenders?

I noticed that the offsets don't really go less than +38 but I'm wondering if an 18x9.5" with +20 offset will clear the fenders. I'm not afraid to roll the fenders at all. I'm just tryin to get an idea of how much work will be involved with tucking a 9.5" wide with a 20mm offset. I want aggressive and flush. I don't want a stock style fitment like c6z reps on the 4g fbody.

BirdsOfAFeather

[QUOTE=buellxb12s;17091974]I may bolt them on then one day. I took them off her car tonight for her to run the stockers in this weather. I set it up beside it just as a teaser. I will clean the wheels tomorrow.

Here is her car with them and mine with the ruffs so technically related to the thread.

Pictures?

myth

iTrader: (7)

Im really liking the options that are out there for the bmw. What year car and model are the wheels for? Will these wheels support a cts-v caliper up front(talking about the space needed to install them)?

Skraight

iTrader: (3)

Any BMW really, but the best ones in my opinion are wheels with specs for E46 M3's. Seem to be the most "flush".

myth

iTrader: (7)

I need a favor. Im looking at a 18x8.5 35mm offset. Would someone with a wheel similar go out and measure the distance from the inside of the spoke to the front of the caliper on a front wheel please?

If anyone with that size would please post a picture or 2 from the front looking down the side of the car. Im looking to see how far out they stick.

Thanks

Skraight

iTrader: (3)

That is actually going to stick in further than a stock camaro ss 10 spoke by about a 1/4 inch

myth

iTrader: (7)

Hhmm. For some reason I was thinking it was the other way. If that s the case then that's even better. Im trying to make sure that they will clear 4 piston brembo caliper.

Thank you sir.

dws6

the clearance is relative to the mounting face to the inside of the spoke, really has nothing to do with the width or offset. Think of it as offset just moves the outer shell further in or out relative to the rotor. The wheel face doesnt necessarilty change and that is what matters. As an example. a 9" wheel with a 48mm offset may sit a 1" inside the wheel well and may have 1" outer lip. but a 9" wheel with a 36mm offset will sit only 1/2" inside the wheel well but have a 1 1/2" outer lip however the wheel face will sit in exactly the same place in relation to the rotor. The only exception I know of is a custom wheel manufacture can play with the numbers and machine the mounting pad to account for those clearances and change that relationship.

Impalafreak

Here are my beyern wheels 19+9.5 and 19+8.5's

Flubyux2

Here's what I settled on. I absolutely love them. Only worry I have is brake clearance. I might not be able to clear brembos.

Bbs Rk
18x8.5" +13mm
245/40 front
245/45 rears
(17x10 +23 coming soon for extra rears)

ZROCWS6

iTrader: (3)

Just noticed my image links don't work anymore.

LOHRTBT

iTrader: (12)

Not lowered yet?

ZROCWS6

iTrader: (3)

No not yet. Moneys tight, yadayada

buellxb12s

iTrader: (9)

[QUOTE=BirdsOfAFeather;17360259]I did this just for you...lets just say these wheels should stay on the BMW lol.

chaman

iTrader: (5)