Concave Wheels
03-14-2013, 12:37 PM
#81
Damn son, they are going to look BAD *** for sure. I like concave wheels, but for me, without "lip" they just don't look all that great. Can't wait to see what yours look like. Make sure to post up pics in here and make a whole other thread too.
03-15-2013, 11:43 AM
#84
These were made by a small wheel company out in California. Made to my specs. They have deep concave forgings front and rear which I don't believe have been done before. As far as I know, these are the only set in existance..
18x9's in front 18x12's in the rear with Toyo R888's 335/30/18's. Had to mini tub the car to fit the rears but you would never know by looking inside the car. Still have rear seats and seat belts.
Thanks for the compliments guys...I took a risk on these and glad they turned out as good as they did.
Some more pics.
18x9's in front 18x12's in the rear with Toyo R888's 335/30/18's. Had to mini tub the car to fit the rears but you would never know by looking inside the car. Still have rear seats and seat belts.
Thanks for the compliments guys...I took a risk on these and glad they turned out as good as they did.
Some more pics.
07-16-2013, 11:27 PM
#86
TECH Apprentice
Join Date: Feb 2005
Location: Newark,DE
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
I thought I did this but I guess not. So here is the picture update. Sorry for the cell pics. I will get better ones with the SLR when I get a few minutes and start the thread with those.
I settled on full polished with clear coat for easy maintenance.
[img]
I settled on full polished with clear coat for easy maintenance.
[img]
08-05-2013, 06:56 PM
#89
TECH Enthusiast
Thread Starter
Join Date: Feb 2012
Location: Orlando
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
Seriously dude, by the time im done driving this for the weekend your going to have to clean all your seats off if you know what I mean. 
Your car is definitely a panty peeler! Just my personal preference I would lower is about 1/2 an inch.
Your car is definitely a panty peeler! Just my personal preference I would lower is about 1/2 an inch.
08-05-2013, 07:00 PM
#90
TECH Enthusiast
Thread Starter
Join Date: Feb 2012
Location: Orlando
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=dws6;17551117]I thought I did this but I guess not. So here is the picture update. Sorry for the cell pics. I will get better ones with the SLR when I get a few minutes and start the thread with those.
I settled on full polished with clear coat for easy maintenance.
Love the deep dish in the rear. What size wheels and tires are in rear?
I settled on full polished with clear coat for easy maintenance.
Love the deep dish in the rear. What size wheels and tires are in rear?
08-05-2013, 08:18 PM
#91
TECH Apprentice
Join Date: Feb 2005
Location: Newark,DE
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=93Euphoria;17596173] 19x10.5 / 305/30 tires in the rear
I thought I did this but I guess not. So here is the picture update. Sorry for the cell pics. I will get better ones with the SLR when I get a few minutes and start the thread with those.
I settled on full polished with clear coat for easy maintenance.
Love the deep dish in the rear. What size wheels and tires are in rear?
I settled on full polished with clear coat for easy maintenance.
Love the deep dish in the rear. What size wheels and tires are in rear?
01-22-2014, 07:34 AM
#93
These are 18x10 +42 in the front and 18X11 +43 in the rear. I will get some more pictures this week in the daylight. I was running out of light in these.
I did have to hammer the rears and tweak the panhard just a bit, but these fit like a glove with the 315/35/18 Hoosiers on.
I did have to hammer the rears and tweak the panhard just a bit, but these fit like a glove with the 315/35/18 Hoosiers on.
02-01-2014, 06:47 PM
#99
TECH Enthusiast
Thread Starter
Join Date: Feb 2012
Location: Orlando
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts