345 30 19 on TA
#1
345 30 19 on TA
Hey guys. Just finished getting a pair of 345's mounted on a 19x12 set of wheels.
If anyone is thinking of doing it all it required was an 1/2'' spacer, longer studs, and a little time with a hammer.
What do you guys think?
If anyone is thinking of doing it all it required was an 1/2'' spacer, longer studs, and a little time with a hammer.
What do you guys think?
Last edited by Maxx Burkholder; 04-11-2013 at 11:19 AM.
Trending Topics
#11
#13
12 Second Club
Join Date: Sep 2005
Location: Bucks County, Pa.
Posts: 4,273
Likes: 0
Received 0 Likes
on
0 Posts
I'd love to run that size at all four corners, but that would require at least the 'Sunoco Special' flairs/fender bulges, as well as some industrial quality, custom front wheel bearing assemblies.
#20
Ill get some more pics up for you guys. Like i said all it took was a 1/2in spacer. And yes that does push the wheels out more. And I did not have to cut the bump stop at all. It really didn't take much time at all.
Here is the link to the wheels for backspacing info.
http://www.supervettes.com/oem-c6z06...-polished.html
Wheels are nitto Invo 345/30r/19
Here is the link to the wheels for backspacing info.
http://www.supervettes.com/oem-c6z06...-polished.html
Wheels are nitto Invo 345/30r/19