SOM cars and rims
08-25-2013, 12:50 PM
#1
SOM cars and rims I know there are some existing/older treads, but looking for fresh opinions.
About to take delivery of a 2002 SOM Camaro w/ 19" Beyern rims.
Looking for something different. PICS PLEASE. The Beyern's will be for sale or trade very soon.
About to take delivery of a 2002 SOM Camaro w/ 19" Beyern rims.
Looking for something different. PICS PLEASE. The Beyern's will be for sale or trade very soon.
08-26-2013, 07:00 AM
#4
Don't know yet...haven't even took delivery...haven't done research.
I will place in classified when I have details. Here is what I do know:
19x8.5 40mm offset & 19x9.5 45mm offset.
Still looking for pics/opinions for replacements. Thanks guys.
I will place in classified when I have details. Here is what I do know:
19x8.5 40mm offset & 19x9.5 45mm offset.
Still looking for pics/opinions for replacements. Thanks guys.
Trending Topics
08-27-2013, 08:32 AM
#13
Thanks guys i'm a big fan too 
i believe they are 9.5" fronts 11" rear. I can't be certain as they were on the car when i got it. I assume it's 9.5" front since the 275's fit nicely without being stretched. They are some beefy wheels for sure 
I wish i knew the offset of them for sure.
i believe they are 9.5" fronts 11" rear. I can't be certain as they were on the car when i got it. I assume it's 9.5" front since the 275's fit nicely without being stretched. They are some beefy wheels for sure I wish i knew the offset of them for sure. 
08-28-2013, 07:08 PM
#17
TECH Resident
Join Date: Jan 2002
Location: central TX
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts
First of all, nice catch - most folks don't even notice them. 
Thanks for the compliments.
Metal plate w/studs welded on the back to bolt in place of the stock mirrors, then an aluminum block behind the door skin to spread the weight of the vette mirrors. A few minor wire splices to make them work, and that's about it.
I used to have some webshots pics up of the before/after when I did the mirrors, but those vanished when webshots changed.
Here's a different shot with a closer view of the mirror:
And one more:
(sorry for the thread hijack!)
Thanks for the compliments.Metal plate w/studs welded on the back to bolt in place of the stock mirrors, then an aluminum block behind the door skin to spread the weight of the vette mirrors. A few minor wire splices to make them work, and that's about it.
I used to have some webshots pics up of the before/after when I did the mirrors, but those vanished when webshots changed.
Here's a different shot with a closer view of the mirror:
And one more:
(sorry for the thread hijack!)
