60 ft times on 18inch Drag radials
#28
11 Second Club
iTrader: (74)
Join Date: Sep 2005
Location: Nicholasville, KY
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Pulled consistent 1.67-1.68 60 fts on 18" BFG DR's in a 6 speed car. Of course they dropped to 1.8's or worse with a 150 shot. lol
![](http://i2.photobucket.com/albums/y37/jtmiller92/MY%2092%20LS1%20RS/04150.jpg)
Last edited by jtmiller92; 10-29-2008 at 06:40 AM.
#30
11 Second Club
iTrader: (10)
Join Date: Apr 2007
Location: Central MA
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
In GM HTP Magazine in April of 07 There is a Trans AM from NY that ran 315/30/18 BFG G-Force DragRadial and cut a 1.55 60' . It had a really nice SD Tuned 455 in it and was a six speed car.
#31
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I've cut 1.69 twice in my Stalled/Cam GTO on the 265/40/18 Mickey. I ran at the strip all 2008 (probably close to 40 passes) and only spun the tires 2 times. I load that baby hard too. LOL
I have been considering going to the 275/17 because my street traction on the 18's is not good. But on a well prepped track, no complaints.
I have been considering going to the 275/17 because my street traction on the 18's is not good. But on a well prepped track, no complaints.
#32
10 Second Club
iTrader: (2)
Join Date: Jul 2007
Location: kissimmee FL.
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If your running n20 i would say ditch the 18's and go with 17's......
When i used to run 17's for dr's i pulled 1.48 60ft spraying a 125 out of the hole on a 315/35/17 Hoosier drag radial and my dad has 1.45x's 60's on them as well.......
When i used to run 17's for dr's i pulled 1.48 60ft spraying a 125 out of the hole on a 315/35/17 Hoosier drag radial and my dad has 1.45x's 60's on them as well.......
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
#33
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have the BFG Drag T/A 255/50/16 with 2500 miles on them and 7 passes at the track and they are looking like slicks. I like them on the street very much. I paied 151$ a tire & they are not bad in the rain...
#34
Banned
iTrader: (14)
Join Date: Nov 2003
Location: Colorado Springs
Posts: 2,220
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have seen a pic with the front tires off the ground with 18" BFG DR's as well. 35 series too! It can be done.
Mine dead hook and I bog with bolt-ons and tuning. I've never cut less than a 2.1, but I'm also at over 5000 ft. and I don't beat on the car too hard.
Mine dead hook and I bog with bolt-ons and tuning. I've never cut less than a 2.1, but I'm also at over 5000 ft. and I don't beat on the car too hard.
#35
11 Second Club
iTrader: (14)
Join Date: Apr 2006
Location: corona
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i run 295's out back and manage consistent low 1.9's and even saw a few low 1.8's my lowest being a 1.809, stock car stock suspension stock hp and 6 speed. these were even on my street tires, toyo t1r's