Shoulder Shaker

iTrader: (36)

Just a quick question. What type of 60ft times are people with the 18inch BFG Drag radials getting? Little info on the setup of the car. Stock weight SS or WS6, M6 putting down about 450 to the ground with the driver being pretty good at launching the car . Just courious.

HAMRHEAD

iTrader: (8)

I'm a little curious about this as well

allbaugh_04

iTrader: (6)

me too. i'm going nuts trying to pic a wheel size. i want 18s...but dunno if i'll ever be able to hook with a stall/cam

michaelg589

iTrader: (1)

I cut a 1.99 on 18" KDW2s.

allbaugh_04

iTrader: (6)

what about the g-force t/a drag radial? they cost 200 a tire and last less than 5k...i wanna see how much these tires are really worth..

allbaugh_04

iTrader: (6)

bump..i still need to know

Smoke346

2 flat, babied b/c of wheel hop. Redoing rear suspension w/ TA, SFC, Relos, and LCA's. Im running 295 Gforce t/a drag radials on 18/10.5. When I get everything put on and get to track, I'll update the 60ft, BTW the SS is a M6 and this 60ft was with 3:42's, Im going to 4:10's this weekend. So far Im happy with them, but mostly on the street. Wont be long and I'll have a set of 15's.

Superman09

iTrader: (65)

Not even close to the same set up but on my 18" BFG DR's i managed a best of 1.88 last year. IMO they have a TON left in them as they were dead hooking. This was done on a STOCK 4l60-e with STOCK torque converter so i was leaving at only 2000 and the stock TC doesnt hit hard at all. Still managed a 1.88 and they hook great on the street. This year i will be stalled so i will be able to see how much these things will hold! Im very happy and impressed with them so-far

IrocZTransAm

Never noticed any differnce in times when I put them on. 60ft times stayed the same. Stock and with an auto so you know why they didn't help.

pozesd99'

iTrader: (3)

i never pulled anything under a 2" but im not the best driver. they spun when i sprayed but dead hook on the street

DarkJuggalo

iTrader: (6)

when i went to the track last season a guy had the MT drag radials and was cutting 1.7-1.8s all night with about 400 hp

pozesd99'

iTrader: (3)

with those he should be cutting at least 1.6's

Rickys S/C Z28

iTrader: (13)

any new updates on 60 ft time with 18 in DRs??

allbaugh_04

iTrader: (6)

i went with 17's i am happy

MadIceV8

iTrader: (12)

I was able to pull 1.90 even on mine with a 3200 stall. My tires are completely wrong for drag racing (Michelin Pilot sports) since they are intended for auto-x. But figured I'd try it once.

litemup02

iTrader: (39)

I believe MIGHTYMOUSE pulled the tires on a 18" DR I remember seeing a pic on here of it. I'll try to find it

Colin91Z

iTrader: (9)

I was able to manage a 1.86 60' on my 295/35 18 BFG DRs. My car makes ~400ish rwhp and is a M6.

98_LS1

iTrader: (38)

I have 18" nitto's and ran a 1.62 60' with heavy *** chrome rims pulling the tires. All on motor, auto, and stock weight.

Rickys S/C Z28

iTrader: (13)

nice so i think i can get some 1.6x then that will be great!

quiet_storm98

iTrader: (48)

i saw his car in person cut some 1.5 60's on 17" drag radials....he never ran 18's i dont think