a good cheap wheel to mount a set of drag radials on
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Jul 2005
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
a good cheap wheel to mount a set of drag radials on
I want to buy some drag radials to be used only when I'm at the track. What would be the best set of wheels to mount them on that is also fairly inexpensive.
Thanks
Thanks
#5
12 Second Club
Join Date: Sep 2005
Location: Bucks County, Pa.
Posts: 4,273
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by daryl2cb@yahoo.com
that or one of those steel wagon wheels, look like crap but for 34.00 bucks each can not get any cheaper than that.
Trending Topics
#8
TECH Addict
iTrader: (28)
Join Date: Sep 2002
Location: Central Texas
Posts: 2,170
Likes: 0
Received 0 Likes
on
0 Posts
Factory take-offs would be my route, actually I did go that route first before I got my Bogarts. No hassle with worrying if they're going to clear the calipers or not, plus they won't stick out like other wheels might and they certainly don't look bad. Like it's been mentioned, you can get them for a very low price too. Plus, they won't be as heavy as those steel wagon wheels. I could go on with the pros, but you get the point...
#14
Launching!
iTrader: (2)
Join Date: Feb 2004
Location: SA Texas
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dug
the silver flakes that came on '00-02 z28's are supposed to be the lightest. 17lbs. They work great with the 255 50 16" m/t radials.
I got 4 flakes to get rid of.
I got 4 flakes to get rid of.
#19
TECH Enthusiast
Join Date: Sep 2003
Location: bethel PA
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
a lot of guys Ive seen run old 3rd gen z28 wheels, I know 3 guys that ran those and didnt have to grind the LS1 brakes, I ran them on my car for a little till I got my new ones.