Summit fake Prostars
#1
11 Second Club
Thread Starter
iTrader: (32)
Join Date: Jan 2006
Location: Southaven, MS (near Memphis, TN)
Posts: 3,701
Likes: 0
Received 2 Likes
on
2 Posts
Summit fake Prostars - Pics added!
Disclaimer to some people who might disagree with my choices...
#1. Yes, I did buy cheap Chinese wheels.
#2. Yes, I do only have 8" wide rims on a Camaro.
#3. Yes, I did buy cheap *** Kumho 165/80 tires.
And the real kicker...I might even cut my springs
But damn, it looks good! Haha. No negative comments please.
I'll have pictures tomorrow sometime!
I had to do some grinding, but it was very little..VERY LITTLE. On the fronts I had to take off just like 2mm deep in a little line that was no more than 1/4" wide on the outside of the caliper. In the rear, again, very little grinding. It was mainly just taking a few mm off that lip thing that sticks up in the center. I probably spent no more than 5 minutes on each wheel..and most of that was just taking the wheel on and off.
My rear tires are M/T ET Street Radials 275/50. They line up exactly with the fender.
My car is still stock 4x4 height, will definitely look good lowered maybe just an inch.
#1. Yes, I did buy cheap Chinese wheels.
#2. Yes, I do only have 8" wide rims on a Camaro.
#3. Yes, I did buy cheap *** Kumho 165/80 tires.
And the real kicker...I might even cut my springs
But damn, it looks good! Haha. No negative comments please.
I'll have pictures tomorrow sometime!
I had to do some grinding, but it was very little..VERY LITTLE. On the fronts I had to take off just like 2mm deep in a little line that was no more than 1/4" wide on the outside of the caliper. In the rear, again, very little grinding. It was mainly just taking a few mm off that lip thing that sticks up in the center. I probably spent no more than 5 minutes on each wheel..and most of that was just taking the wheel on and off.
My rear tires are M/T ET Street Radials 275/50. They line up exactly with the fender.
My car is still stock 4x4 height, will definitely look good lowered maybe just an inch.
Last edited by jetlag; 01-07-2008 at 05:22 PM.